Box profile roofing sheets

[Thrashsmith]

Hi all, I'm looking to replace a roofing sheet on my rented workshop unit so I need to find a like for like replacement in profile.
I did a bit of Googleing & ringing around but it quickly seemed like companies sell a pretty limited selection of profiles & this maybe an older profile...?
Can anyone help point me in the right direction? I know nothing about roofing sheets. Are there suppliers who do older profiles of sheets? One of the people I spoke to gave the dimensions in imperial, so I've marked up the image in imperial. 6.5" x 1,1/4".
The full sheet length top to bottom is 4510mm & 1100mm wide. Thank you in advance.

 

[jenki]

I've used this company in the past but their profile is completly different I'm afraid.
They are very helpful so a call might get some suggestions.

National Cladding Wales | Industrial steel cladding & roofing sheets

National Cladding Wales are leading Industrial steel cladding suppliers and roofing sheet manufacturers based in Capel Hendre, South Wales, UK.

www.national-cladding.co.uk

 

[Screwdriver]

Quicker and easier to remove it in this weather and patch repair. The only danger is in disturbing the surrounding panels might cause them to fail. I assume the landlord wouldn't be too happy with a more simple patch in place?

 

[tigdlo]

https://www.tinmansteelsltd.co.uk/uploads/5090-profile-drawing-dwg-tms-34-1000r-roof-profile.pdf

I've used this company, they have always been well priced with a decent service but I last bought from them about 5 years ago.

 

[dan.taylor.1]

Cardinal steels in Bromsgrove are my go to now after a recommendation from someone on here.

 

[zzr1200]

@roofman may also be able to point you in the right direction, possibly.

I know he usually does the flat stuff, but he may know a bit about the wigglerly versions....

 

[gaz1]

your measurements are wrong you do it from the folded part to another folded part

you also need to do the measurements in metric not imperial

you need 3 measurements

width of top profile
width of bottom low profile
the height profile

you may also need a forth measurement of the width of the panel itself as sizes has changed

metal profile roofing sheet dimensions - Google Search

one other thing i will mention seen as that hasnt got it you need a plate to cover over 2 profiles to deflect water from going into the channel inbetween behind the chimney and reseal properly around the chimney

that dosnt have it so a good rotting point

 

[Erie Fred]

I would take a piece of cardboard and hold it up to the edge, trace the profile onto it.