shenion
Tool Pack Rat
- Messages
- 7,586
- Location
- Stone Mountain, GA USA
It was already made a flatbed trailer by adding a sheet of plywood:
I changed form the tiny wheels to 12" and added weld-on D-rings and recessed LED lights.
Now building a frame to make it square and add sides. First, a frame to square off the bottom:
Stick welding it so far. Will use MIG on some if my verticals don't get better Here's some of the welds:
And some overhead welds on the front bottom:
They were a pain as I could not see well.
Will update thread as I add the sides.
I changed form the tiny wheels to 12" and added weld-on D-rings and recessed LED lights.
Now building a frame to make it square and add sides. First, a frame to square off the bottom:
Stick welding it so far. Will use MIG on some if my verticals don't get better Here's some of the welds:
And some overhead welds on the front bottom:
They were a pain as I could not see well.
Will update thread as I add the sides.