Assembly paste?

[Turbo]

Novatio Nova Lube, best I've ever seen.
https://www.novatio.com/en/products/nova-lube

The rep demo'd it by fitting a nut onto an m12 s/s bolt that was coated in the lube. Then he battered the threads with a hammer & to our surprise the nut unscrewed over the damaged threads with no galling! He repeated the test, this time he heated the nut to red heat. On s/s this normally results in the nut welding itself to the bolt but it unscrewed no problem due to the lube.

 

[Kent]

As a true anti seize grease I should go copper slip.. However there's a bunch of specialist stuff as seen in this thread.

 

[brightspark]

copperslip is a good insulator. it only contains under 5 percent copper it hardly gives a reading using the megger at 500volts

 

[8ob]

Another vote for copperslip, all our kit is permanently buried in muck /calamity and this stuff works. Copperslip in a tin with a brush or rattle can is a workshop must around here.

Bob