Argon gas for Tig welding

[BenKeeling]

Hey everyone, I'm just getting into Tig welding and planning to start with a 10l setup. Does anyone know a good supplier around West Yorkshire, especially Wakefield? Also, if you have any tips on where to get a decent regulator so I don't waste gas?

 

[Munkul]

Call around welding/hardware supply shops and ask prices for rent-free bottles and refill (exchange) costs. Adams gas and hobbyweld are the two main ones off my head, these are franchised to various suppliers.

Having started with a 10l cylinder myself, I wouldn't recommend it, they are generally 140bar or lower, whereas 20l cylinders are generally at least 200bar - ie, you get 3x the gas in a larger cylinder, and it doesn't cost twice as much, so much more value for money.

 

[Popcorn]

ELGA Optimator reg. A bit expensive but IT WILL save you loads of money on gas and you'll get your money back several times over just on the gas saving.

 

[RichardM]

My 10L is filled to 200 bar, rent free but Mansfield is probably a bit too far for you.

Look up SGS as well.

https://www.sgsgases.co.uk/find-a-distributor/?drts-search=1&search_location_address%5Btext%5D=Wakefield%2C%20UK&search_location_address%5Bradius%5D=30&search_location_address%5Bterm_id%5D=&search_location_address%5Btaxonomy%5D=&search_location_address%5Bcenter%5D=53.6848162%2C-1.5038596&search_location_address%5Bviewport%5D=53.620743%2C-1.556621336895333%2C53.71554721427876%2C-1.463839917716825&search_location_address%5Bzoom%5D=