Anybody used weldequip kit

[Jamie nixon]

Hi all, i have got a friend that has a bottle of co2
Gas would this conversion kit fit no problems

has anybody any experience of these kits.

 

[backpurge]

Provided the fitting on the hose matches whatever you’ve got it shouldn’t be a problem

 

[Tom O]

There is a adapter fitting that can go between them.

 

[Gareth0123]

Weldequipe is a sound retailer. I've never had issues with torches, front end consumables and a regulator I have purchased from them

This is the adaptor that converts a pub/hobbyist disposable C0₂ regulator to a commercial welding gas cylinder.
They are readily available on line and known as G5/8 Argon CO2 Adaptor to CO2 Regulator Conversion.

The parallel flat end is the hobbyist cylinder fitting and the taper end is the commercial welding gas cylinder fitting,

 

[garethp]

I use one of those regulators and its fine, I use mine on co2 fire extinguishers which means I have to use the bottle upside down otherwise the dip tube draws off liquid co2 and that causes the regulator to freeze up.

If your using a pub gas type bottle it'll be ok upright.

 

[Jamie nixon]

Weldequipe is a sound retailer. I've never had issues with torches, front end consumables and a regulator I have purchased from them

This is the adaptor that converts a pub/hobbyist disposable C0₂ regulator to a commercial welding gas cylinder.
They are readily available on line and known as G5/8 Argon CO2 Adaptor to CO2 Regulator Conversion.

The parallel flat end is the hobbyist cylinder fitting and the taper end is the commercial welding gas cylinder fitting,

Hi cheers for that bud. Let me get this right that adaptor is used on a co2 gauge to fit a co2/argon bottle?

 

[Gareth0123]

correct. to adapt a regulator from fitting a hobbyist cylinder to a fitting a commercial cylinder.