Trevor Marron
New Member
- Messages
- 4
- Location
- Northampton England
Hello everyone.
I have had a look around and it would appear that my rubbish welding is not me, it is my equipment!
I am getting some reasonable welds going in some 3mm mild steel using a 20 year old SIP 105DP using CO2 as a shield gas, but I can feel and hear the wire feed motor going at different speeds and have ordered the parts to overhaul that (24v 10 Amp supply and 240v relay), so now my attention has turned to the poor quality torch.
I would like to change it to a euro torch and understand that I need a 24v gas solenoid (mine has the brass valve in the gun) and a Euro Torch conversion kit. I have found one that is so cheap on eBay that it could be a pricing error, but does it contain what I need? Will it work with my welder? This is the eBay item number: https://www.ebay.co.uk/itm/Mig-Weld...232737420280?_trksid=p2349526.m4383.l4275.c10
If it is suitable I would hate to miss it at that price.
I have had a look around and it would appear that my rubbish welding is not me, it is my equipment!
I am getting some reasonable welds going in some 3mm mild steel using a 20 year old SIP 105DP using CO2 as a shield gas, but I can feel and hear the wire feed motor going at different speeds and have ordered the parts to overhaul that (24v 10 Amp supply and 240v relay), so now my attention has turned to the poor quality torch.
I would like to change it to a euro torch and understand that I need a 24v gas solenoid (mine has the brass valve in the gun) and a Euro Torch conversion kit. I have found one that is so cheap on eBay that it could be a pricing error, but does it contain what I need? Will it work with my welder? This is the eBay item number: https://www.ebay.co.uk/itm/Mig-Weld...232737420280?_trksid=p2349526.m4383.l4275.c10
If it is suitable I would hate to miss it at that price.