Adhesive for use in shower

[Morris]

Some time ago I bought a soap/shampoo etc rack for our shower. It came with sticky pads (which could be screwed on but it's porcelain tiles and I don't want to drill them. There are other reasons.).
Predictably it fell off after a short time.
We like the rack and would like to refit it.
Any suggestions for an adhesive or double sided tape that would work. The pads are an unidentified plastic.

 

[Dapph2]

What ever you use ensure you clean the tiles a couple of time with new clean cloths each time using isopropanol to remove every trace of oily soaps & gunge etc.
I would avoid any of the double sided sticky pads that had a foam or paper type centre layer .

 

[Mick Annick]

Number plate stickers

 

[Craig-SM]

3M VHB tape

 

[Cobbler]

CT1 or Soudals Fixall

 

[RichardM]

As above, tape the rack in place for 24 hrs to allow it to cure.

 

[Mark 5]

Some time ago I bought a soap/shampoo etc rack for our shower. It came with sticky pads (which could be screwed on but it's porcelain tiles and I don't want to drill them. There are other reasons.).
Predictably it fell off after a short time.
We like the rack and would like to refit it.
Any suggestions for an adhesive or double sided tape that would work. The pads are an unidentified plastic.

I'd use some bog standard kitchen/bath sealant, blobs of it, find a way of keeping rack to wall, ( Tape ), while the stuff cures, it will never come off as long as you don't overload rack.

Wall and back of rack has to be squeaky clean and dry.

 

[voipio]

Sticks like Sh*t will fix it. Just support the rack in position whilst the glue sets. About 24 hours should do it. As others have said, make sure the rack and tile surfaces are clean and grease free, before applying the adhesive.

 

[frank horton]

we have a stainles steel corner rack in a standard shower cubicle...rounded front section.......like u didn't wanna drill the new tiles.....
it was around 30 euro's....in the 3 years it's been there I've never kicked it....
mind u it would never fall over with all her junk in/on it....

 

[Morris]

Thanks for the replies guys. I'll update when I have successfully stuck it on.

 

[Morris]

A quick update.
CT1 has done all I required, great stuff.
Thanks for the advice.