Tried hafele mate? Have a decent filter for their gear on the siteI have spent ages trying to find a replacement pair of these.
They are 550mm long and 250mm extension. But they have to be 2 segment and trying to search for them is bringing every other size and shape but not these.
Tried hafele mate? Have a decent filter for their gear on the site
I concurI would start by looking at the Accuride catalogue (they are often called slides rather than runners)
Yeah this appears to be one of my problems. I dont know what they mean by installation length and extension length. Mine are 550mm long and the end part extends out 250mm making a total of 800mm when extended. They are only 2 segment and the length is critical or it wont slide the platter out far enough.Not sure if its relevant but when I was looking for HD drawer runners for the water tray of my plasma table not all were rated to slide out 100%. The amount they pulled out seemed to dictate the runner combination.
Bob
Installation length being the length of the closed runner eg Cabinet depthYeah this appears to be one of my problems. I dont know what they mean by installation length and extension length. Mine are 550mm long and the end part extends out 250mm making a total of 800mm when extended. They are only 2 segment and the length is critical or it wont slide the platter out far enough.
That part I guessed right then. Now is extension length 250 or the Total length 800 in my case.Installation length being the length of the closed runner eg Cabinet depth
Please bear with me, whilst I look into your query. |
We wouldn't have a runner that would give you that extension, im afraid. |
Ok thanks to all that replied.Their sites not working properly for me at the moment but I remember it being ok before when I got some of these.. any good, assuming they have the longer length..?
www.ironmongerydirect.co.uk/product/klug-455mm-ball-bearing-drawer-runner-double-extension-450mm-length-bright-zinc-884772
Reminds me, thats another project I need to work on..