40mm od stainless steel washers

[mike os]

Looking for a couple of washers 38-40 mm od with 1/2 inch hole... Most seem to be 30 mm od....

Alternatively has anyone got an offcut of stainless bar of suitable size I could procure?

 

[Tiggy_dorset]

I have some 34 x 1/2", or some 50 x 8.5

Dont know if they 'will do'. Could drill out the 50 x 8.5

 

[MattH]

I've got loads of stainless bar, I'm sure I'll have something in that size range that I can chop a bit off for you.

 

[MattH]

Just checked, I've got about a metre of 1 3/8" EN58.

Maybe a bit small for you, let me know if you want a bit.

 

[Bill Edwards]

I think this is what you want:

http://www.ebay.co.uk/itm/M4-M5-M6-...ASHERS-/360686074300?var=&hash=item92b73a8e04

They're M12, but the clearance hole will be larger than 12mm, probably about 1/2"...

 

[gordon stephenson]

I have just bought from ebay. Stainless 40mm 0d x 6mm hole "penny washers" You would just need to open the the bore up. But they were only around 1/16" thick.

 

[mike os]

ordered some washers.. i tried the evil place but could not find wat i wanted