3D printers

[Jlg]

But here is a page that takes you through the registration process

https://www.autodesk.com/campaigns/fusion-360-for-hobbyists​

Cheers that's not the one I jad found

 

[AndersK]

I've upped retraction to 6, 8 and 10 mm and also turned z hop on and off and it's not made a load of difference. I'm wondering if increasing or decreasing the temperature might help.

Here's my latest petg, is it near the stringing you get?

Did a print last week with 6 pieces on the bed and it was not more than this.

 

[Jlg]

What are people's thoughts on the creality cr10s pro as I need a new printer now and if I can help it I won't be buying the Same brand as the last one

 

[ronan]

I use fusion 360, had it on my pc for months before I followed a recommendation on here to watch Lars Christensen tutorial videos which helped immensely.
https://www.youtube.com/channel/UCo29kn3d9ziFUZGZ50VKvWA

Randy richard in the shop on youtube, is doing a little steam engine build, and is doing the design on fusion 360. Its worth following if you are only learning.