22 mm od reducing ring

[desmo11225]

Hello All
I have searched the web well, looking for a reducing rings size 22 mm outside diameter to 10 mm inside diameter about 1 mm to 1.5 mm thick, only a few 5/10 would be more than enough .
Does any one know where I can buy some or make some for me please , any help would be very much appreciated , Thank You desmo11225

 

[merryman]

How accurate do you need? Sounds more like a flat washer. 5/16" imperial are available in 3/8" inside 7/8" outside and 10mm are available in 10.5mm x 22.5mm

 

[slim_boy_fat]

http://www.woodstockindustrial.com/pennywasher.html

 

[eLuSiVeMiTe]

Hello All
I have searched the web well, looking for a reducing rings size 22 mm outside diameter to 10 mm inside diameter about 1 mm to 1.5 mm thick, only a few 5/10 would be more than enough .
Does any one know where I can buy some or make some for me please , any help would be very much appreciated , Thank You desmo11225

Pop over and have a play on the lathe one weekend mate. wont take long to make.

not far off me

 

[Screwdriver]

Hello All
I have searched the web well, looking for a reducing rings size 22 mm outside diameter to 10 mm inside diameter about 1 mm to 1.5 mm thick, only a few 5/10 would be more than enough .
Does any one know where I can buy some or make some for me please , any help would be very much appreciated , Thank You desmo11225

I might have a stack of washers that size. I'll have a look tomorrow.

 

[desmo11225]

Hello eLuSiVMiTe and Screwdrive . I have continued to search the web but there seems to be no chance of buying any .
Thank you eLuSiVMiTe . I wish I could come over to you but at 93 years my driving days are long over I'm afraid , A stepped washer would be fine with 22 mm to mount a diamond disc and an 8 mm or 10 mm hole to accept a bolt .
Thank you Screwdriver if you can fix me up with the above that would be great.
I'll have to see if I can find a machinist in Luton , all my old colleagues have packed up . Ah Well desmo11225

 

[Screwdriver]

Sorry, outer diameter is 20mm, hole is 6mm.

I could make some. What material is preferred and what are they for?

 

[8ob]

[QUOTE="desmo11225, post: 1235833, member: 18608" ] I wish I could come over to you but at 93 years my driving days are long over . I'll have to see if I can find a machinist in Luton , all my old colleagues have packed up . Ah Well desmo11225[/QUOTE]

Sir to still be tinkering in your shed at 93 years of age makes you an absolute legend.

Bob

 

[desmo11225]

Hello Screwdiver, Hello eLuSiVMite, Well yesterday we bought a little old Myford lathe an A2 , so will be having a little play with that , in the meantime Mr Screwdriver if your washers are 22 mm od with a 10 mm hole would you please make me half a dozen . We ca'nt get the lathe for a couple of weeks , the washers are reducing rings really to mount a diamond disc and need to be about 1.2 mm thick , how do you pass your email on to members ??????? Also eLuSiVMite How far away are from Luton are you , I live in Limbury about 5 or 10 minutes from the M1 Junction 11 by the Luton and Dunstable Hospial , how about coming over and swapping some Metal working Skills for some Woodworking skills, that would be good. All the Best desmo11225 PS Bob ,I ca'nt walk but I try to keep active.

 

[Screwdriver]

Ok I'll knock some up in aluminium.

 

[desmo11225]

Hello Screwdriver, That would be great, How do we contact one another ,????? I am sorry about this ever so small print the computer has a mind of it's own . Thank You desmo11225

 

[eLuSiVeMiTe]

Hello Screwdiver, Hello eLuSiVMite, Well yesterday we bought a little old Myford lathe an A2 , so will be having a little play with that , in the meantime Mr Screwdriver if your washers are 22 mm od with a 10 mm hole would you please make me half a dozen . We ca'nt get the lathe for a couple of weeks , the washers are reducing rings really to mount a diamond disc and need to be about 1.2 mm thick , how do you pass your email on to members ??????? Also eLuSiVMite How far away are from Luton are you , I live in Limbury about 5 or 10 minutes from the M1 Junction 11 by the Luton and Dunstable Hospial , how about coming over and swapping some Metal working Skills for some Woodworking skills, that would be good. All the Best desmo11225 PS Bob ,I ca'nt walk but I try to keep active.

Im 5 mins from junc 13 so not a huge distance.
Well done on the lathe. Coincidently I made a reducer for a diamond blade last night. Needed to use the saw today and only had an inch bore blade to hand.

 

[desmo11225]

Hello Screwdriver
I've got your email but I don't know how to answer it as I 've forgotten my password for Mig Welding Forum , I used to have my Grandson living with me so would easily sought me out but he has moved on now. desmo11225

 

[Screwdriver]

Ok. I'll sort something out. They are done, will upload pics and stuff later (after the MotoGP).

 

[Screwdriver]

Hello Screwdriver
I've got your email but I don't know how to answer it as I 've forgotten my password for Mig Welding Forum , I used to have my Grandson living with me so would easily sought me out but he has moved on now. desmo11225

Well you are logged in (!) so you should see my private message in your inbox.

I made them out of steel because the thinnest alloy I have is 2mm.

Ideally I would have also bonked out the large diameter but couldn't find a 22mm punch and die.

So made up a mandrel.

Mounted the stock so the outer diameter would be perfectly concentric with the inner.

Done

Just need to get me your details.

Don't post your info in the main forum or it will get scooped up web bots, await your response to the message you should be able to see in your inbox.

 

[desmo11225]

Hello Screwdriver, Yes I 've got your message in my in box but a box tells me to log in and as I've said I've forgotten my pass word , for a long time now I am permanently logged in ie clicked the remember me box, we are collecting the Lathe the week end 9th of November I'd like the reducing rings you've made before if I can , let me know the cost . Sorry to be such a pain .
desm11225 I'll let you know what they are for privately , bit of a story.

 

[Screwdriver]

There is no cost, I just don't know how I am going to sent them to you.

Sort it out with the moderators on this site.

 

[slim_boy_fat]

There is no cost, I just don't know how I am going to sent them to you.

Sort it out with the moderators on this site.

I've done a "Report" of your post with the reason as "Member needs help" so that the Mods will be sure to pick up on the problem and hopefully sort it out. Hope you don't mind.

 

[rtbcomp]

Hello Screwdriver, Yes I 've got your message in my in box but a box tells me to log in and as I've said I've forgotten my pass word , for a long time now I am permanently logged in ie clicked the remember me box, we are collecting the Lathe the week end 9th of November I'd like the reducing rings you've made before if I can , let me know the cost . Sorry to be such a pain .
desm11225 I'll let you know what they are for privately , bit of a story.

If you're not logged in, how can you post in this thread?

 

[desmo11225]

Hello rtbcomp, Screwdriver has made me some reducing rings and I've got mail in my in box ,which comes up with a form telling me to view message but then another form tells me I must be logged in and asking me give my details including my pass port which I have forgotten , as long ago I sked to be permanently logged in by ticking the remember me box , I'm a bit more skill full with computers as I was then , not much though. Please help Screwdriver and myself to be able to contact one another so that Screwdriver can pass on the reduction rings he has made for me. All the Best desmo11225