200A AC/DC with fan on demand cooling

[gordon stephenson]

The FR 35 pedals have a few small adjustments, But not to any great extent,

 

[Richard.]

It's a preference thing. I quite like them set up higher like that.

 

[matt1978]

How much have you been quoted for the FR32 Pedal?

 

[Xup]

Matt, I only found the FR 35 at first and that was @ £475+Vat, have now found the FR 32 @ £299+Vat

Still a lot of money when the SSC works out at about £200 +vat.

Brad.... My biking track days left me with a broken hand and lots of well broken fingers on my right hand......hand is a lot stiffer now I am older.
The Exup and TL1000R have a lot to answer for !.... hence foot pedal is easier for me.

 

[Xup]

Update.. bit earlier than Winter but .

Lorch Arrived yesterday, picked it up this evening.

 

[Xup]

Cheers Brad, first question....the gas connection (male rectus21?)on the Dinse is tiny do you know the size so I can order some spares for other torches.

 

[Richard.]

Put up a pic.
I think the gas will be rectus 20KA.
21 tend to get left for the rear of the machine for the bottle and water cooler connection.

 

[Xup]

Pics (phone sorry), rectus fitting and what you get in the Lorch offer package.

 

[Richard.]

Rectus 20ka exactly the same as my old rehm.
Plug is typical ewm,Lincoln 5 flat pin thing. Expensive plugs mind but easy to obtain. Make any torch work with that easy.

 

[HughF]

Teuchel plug, same as the hitachi. @Jim Davey has them on the shelf I understand...

 

[Richard.]

Teuchel plug, same as the hitachi. @Jim Davey has them on the shelf I understand...

He will do yes as that's the ewm plug also

 

[Jim Davey]

I most certainly do.
Please PM me if you'd like a quote.
Thanks

 

[Richard.]

While your on make a job of it and get jim to quote you for a decent torch and stick that chipping hammer back in its box
I'd be ordering up some bits for a diy cooler and give the new HT a first proper project of an Alu or stainless steel tank.
Then treat her to one of jims speedways. That's just me though lol.

 

[Xup]

While your on make a job of it and get jim to quote you for a decent torch and stick that chipping hammer back in its box
I'd be ordering up some bits for a diy cooler and give the new HT a first proper project of an Alu or stainless steel tank.
Then treat her to one of jims speedways. That's just me though lol.

Ha! where to start , Ok shoot me down If this is going to cause me issues in the future.

Plan 1,...... cut the rectus20 off the torch about 3" from it.....fit a quick connect rectus21 female to the other end of the now 3" rectus20 lead,
fit rectus 21male to the now shorter gas line on the lorch torch. Job done all my torches will now fit the lorch machine as all my other torches are rectus21 on a dinse 35-50.
Hope that makes sense to you all.

Torches, Have CK9 and 17 and a cheap 20WC, going to use a foot pedal so as I see it I won't need any torch switches/plugs.
Have a Tyco 180w 1350rpm motor and Procon Pump, ....Richard can you see where this is going now

Build a tank for water cooling as a first project, never having tig welded Alu before!.

Easy lol

 

[didsthewelder]

Ive got the exact same box of goodies at work in the office ,Its been there two weeks and I still haven't had time to open it yet .i also have the foot pedal and torch with a flex head .

 

[Richard.]

Build a tank for water cooling as a first project, never having tig welded Alu before!.

Gotta start somewhere mate. Water cooling is definitely the only way to go with an AC/DC and a chunky 200 amps on tap.