Need a small brass part making, anyone do it for beer tokens?

[Kayos]

I need a simple part making, if i had a pillar drill or even a vice I'd do it myself, sadly my workshop is still a figment of my imagination

I need a piece of 15mm brass rod (same o/d as copper pipe) about 50mm long, drilling all the way through and tapping M8 at one end. Threads only need to be 20mm long.
And I would like 2 of them

Anyone willing/able to do this?

 

[Pete.]

What's the application?

 

[Kayos]

Its to put a temperature probe into a water bath, I have the stainless probes but i want to use a tank connector to get a good seal on the water bath

 

[MattH]

I'll do it for you.

 

[mike os]

sorted!

 

[MattH]

I'll probably get them done in the next couple of days.

 

[Kayos]

I'll probably get them done in the next couple of days.

Many thanks

You have PM

 

[Richard.]

If anyone is geared up for that it's mr Matt

 

[DanielW]

You don't need any sort of tooling except a die,2 or 3mm brass walled tubing can be bought on the bay,then its a matter of cutting to the size and threading.

 

[Richard.]

You don't need any sort of tooling except a die,2 or 3mm brass walled tubing can be bought on the bay,then its a matter of cutting to the size and threading.

What do you need a die for?
The thread is internal the way I read it.

 

[Richard.]

You don't need any sort of tooling except a die,2 or 3mm brass walled tubing can be bought on the bay,then its a matter of cutting to the size and threading.

Also if it's to be tapped m8 it needs a 6.8mm hole drilling through it. Unless I've read it completely wrong your suggestion is miles off.

 

[Kayos]

Also if it's to be tapped m8 it needs a 6.8mm hole drilling through it. Unless I've read it completely wrong your suggestion is miles off.

Yes, a solid piece of 15mm brass rod, drilled all the way through and tapped M8

 

[addjunkie]

Are you sure its m8, if so fine or coarse, some things of this nature have imperial threads?

 

[DanielW]

What do you need a die for?
The thread is internal the way I read it.

I assumed it was external thread but....internal all the better and a tap will suffice.

Just had a look on the bay and tubing is £7 for 12" piece with a 15mm size and a 13mm internal wall thickness

 

[DanielW]

Also if it's to be tapped m8 it needs a 6.8mm hole drilling through it. Unless I've read it completely wrong your suggestion is miles off.

Ah I see,well there ya go no real information on the begining of your post.

 

[Richard.]

Ah I see,well there ya go no real information on the begining of your post.

I'm not the op

 

[Richard.]

I need a piece of 15mm brass rod (same o/d as copper pipe) about 50mm long, drilling all the way through and tapping M8 at one end. Threads only need to be 20mm long.

This was the request.
Think mattH has got it sorted now.

 

[DanielW]

I'm not the op

I didn't say you where.....will you stop doing a john cleese script.

 

[MattH]

Oddly, when I read the first post, I thought he wanted a bit of rod drilling all the way through with threads tapped in one end, which were to m8...

That is what he wants!

 

[Richard.]

Oddly, when I read the first post, I thought he wanted a bit of rod drilling all the way through with threads tapped in one end, which were to m8...



That makes no sense, how can a 15mm od pipe have a 13mm wall thickness? The walls would overlap by 11mm.

Oddly that's how I read it too.
I was gonna say that the above was a little confusing with the wall thickness and OD not adding up but my john Cleese lines were becoming annoying.

Manwell!!!!!!!!!!