zzr1200
Working at 650 ft on open steel work.
- Messages
- 5,511
- Location
- Glapwell, Chesterfield, Derbyshire, UK
The original weld had cracked along the top HAZ zone, used an air die grinder to groove the weld out,
the alloys about 5mm.
I used a pedal so don't know the amperage, but the welder was max'd out at 220 amps, I recon about 170/180 amps.
The start and stop could be better, but any advice, please
View attachment 56637
the alloys about 5mm.
I used a pedal so don't know the amperage, but the welder was max'd out at 220 amps, I recon about 170/180 amps.
The start and stop could be better, but any advice, please
Last edited: