any sites that have black & decker info for old tools

[steveo3002]

ive got a ye olde lawn raker by black and decker...would like a new drive belt but struggling to find info on it

i expect its from the 80s model S2E5 LR

anyone know a site where i might get a diagram or part numbers

 

[brightspark]

ive got a ye olde lawn raker by black and decker...would like a new drive belt but struggling to find info on it

i expect its from the 80s model S2E5 LR

anyone know a site where i might get a diagram or part numbers

http://www.ebay.co.uk/itm/like/1211...&ff3=1&ff11=ICEP3.0.0&ff12=67&ff13=80&ff14=83

 

[Hitch]

Measure the belt, width, no of teeth, pitch and so on...

 

[steveo3002]

Measure the belt, width, no of teeth, pitch and so on...

yeah spose i will have to ...not really sure how to measure the pitch/teeth size etc

ebay one is too long.

 

[zzr1200]

yeah spose i will have to ...not really sure how to measure the pitch/teeth size etc

ebay one is too long.

http://www.motionco.co.uk/timing-belts-timing-belts-c-25_38_27.html


hth


zzr

 

[steveo3002]

seems to be 70 teeth

 

[ford34/2]

848485

Google 848485 belt

too many to choose from heres a few,

http://shop.marksman-ind.com/black-and-decker-848485-equivalent-belt-6362-p.asp

http://toolsandpartsdirect.co.uk/Black--Decker-Drive-Belt-848485__p-6211.aspx

a few on E bay this seems the cheapest:
http://www.ebay.co.uk/itm/GENUINE-B...wnmower_Parts_Accessories&hash=item5659154d7f

http://www.powertoolspares.com/accessory/848485-belt/

http://www.amazon.co.uk/DRIVE-BLACK-DECKER-ORIGINAL-848485/dp/B00412RT6G

http://www.powertoolvault.co.uk/Black-Decker-848485-DRIVE-BELT-LR100-GD310-GB200-GB201-GB300

http://www.centralspares.co.uk/product/black--decker-drive-belt.aspx

 

[steveo3002]

cheers

£9 for a belt !!! i only paid £10 for the machine lol

will run it till it snaps then ...was gona treat it to a new belt

 

[ford34/2]

yes it will, and unliklty to do any damage when it does snap, Spares on almost anything these days are daylight robbery, I would hate to build a car with genuine spare parts.-- or anything else for that matter. It may be worth a look at a bearing / powertrain supplier and see if he can match the number to a supplier -- hopefully at a fraction of the cost, I got a Bosch orbital sander one in 2012 that way, it was £1.70,

stan

 

[steveo3002]

yeah sounds more like a £2-3 part to me

is that number a black and decker number or a belt number , as in if i find a hardware place that does belts what would i need to ask them for

 

[Wedg1e]

Looks like a standard Contitech XL-type timing belt to me, square rather than round teeth, about 5mm pitch

I suppose the way to look at it is that when the belt snaps, can you buy another machine for a tenner?
If that one's lasted since the 1980s (when, being B&D, it was probably a budget machine anyway) it's probably more robust than anything you could buy cheaply these days.

 

[steveo3002]

yeah its a good machine...i will pay a tenner if it snaps , but was just going to treat it to a new one just because lol