Luke
Member
- Messages
- 1,929
- Location
- Whitchurch, Shropshire
Morning all,
I've tried spraying for the first time, after a repair section had been welded in, metal was sanded down, then had a coat of rattle can acrylic primer, then I've tried a few coats of white gloss top coat.
The white goes on, and dries, pink! I think there could be a few options;
1) The white gloss is reacting with the primer
2) The grey primer is affecting the white - might get better with more coats?
3) The white gloss is knackered - the tin is probably from June/July 2012, looking at the date code on it.
What do people think?
Luke
I've tried spraying for the first time, after a repair section had been welded in, metal was sanded down, then had a coat of rattle can acrylic primer, then I've tried a few coats of white gloss top coat.
The white goes on, and dries, pink! I think there could be a few options;
1) The white gloss is reacting with the primer
2) The grey primer is affecting the white - might get better with more coats?
3) The white gloss is knackered - the tin is probably from June/July 2012, looking at the date code on it.
What do people think?
Luke