Aldi Tools & Work Wear

[cumbriasteve]

Just a heads up folks for forthcoming Aldi day that may interest some of us.

https://www.aldi.co.uk/en/specialbuys/thursday-17th-october/

 

[TechnicAl]

Thanks for that
Onion Bhajis look good

 

[sloderby]

Jumbo Clean Up Roll
Handy if your pet elephant gets dirty!

 

[Wedg1e]

'Heavy duty' padlocks... four quid?

I see the torque wrenches have gone up, they used to be 12 quid

 

[cumbriasteve]

Thanks for that
Onion Bhajis look good

I must admit when I said 'may interest some of us' I was thinking along the lines of tools etc, but at least you have your priorities right

 

[DuffyBB]

I must admit when I said 'may interest some of us' I was thinking along the lines of tools etc, but at least you have your priorities right

Maybe gonna use them as padlocks?

 

[Wedg1e]

Maybe gonna use them as padlocks?

Or fishing weights?

 

[gordonendersby]

Thats handy I need some workshop paper and those small silicon sealant tubes are a useful size for small jobs as well.

Ive got one of the cutting mats and a knife set. Very handy and the scalpels and knives are of a reasonable quality. If its the same as mine it comes with a small sharpening block for the blades.

Not sure about a 15 quid torque wrench, they dont state the range either.

If you like the bhajis try the jumbo pasties.

Gordon

 

[Tiggy_dorset]

Tempted by the F-Clamps.
Im also fed up of spinning cylinders down the garden path leaving squiggly lines engraved in the paving slabs, so the sack truck shall be purchased I think

 

[Robotstar5]

Tempted by the F-Clamps.

I bought some of the F clamps, not pro quality but OK for DIY use.

 

[TechnicAl]

Tempted by the F-Clamps.
Im also fed up of spinning cylinders down the garden path leaving squiggly lines engraved in the paving slabs, so the sack truck shall be purchased I think

I was fancying one of those..........help carry the Onion Bhajis

 

[Robotstar5]

I was fancying one of those..........help carry the Onion Bhajis

You could probably carry more with a brick carrying clamp

 

[waldershelf]

I got a couple of pairs of the trousers last time they were on offer. Very happy for 9 quid a go, better than cheap jeans.

 

[BrokenBiker]

'Heavy duty' padlocks... four quid?

I see the torque wrenches have gone up, they used to be 12 quid

not thy mock until thy has...given a go lol

I bought a few for the shed and tool box. not from aldi but for the same price so I reckon they would be of similar quality.

granted you wouldn't use them to protect your mint condition classic car and so on, but for a bit of a stronger lock for the tool shed or tool box they work well.

we tried smashing one off with a sledge hammer and it held up long enough to keep us happy

 

[normspanners]

Not sure about a 15 quid torque wrench, they dont state the range either.

they are not to bad I used to use them in the workshop on each of the ramps just left set for wheel nuts also one in each of the recovery breakdown trucks. PET HATE people GUNNING wheel fastenings up SOLID!!
I would not build an engine with one though.