Tomet T315 Cold saw gear oil

[Rising.Frequency]

I have a Tomet T315 Cold saw. Pic below of the same one.

Excellent saw. I need to replace the gear oil in it.

I have no manuals or anything, and can’t find anything online for this specific saw about what oil to use.

Doing some research a lot of people use SAE 140 in similar ones. Would this be correct?

Thanks, Chris

 

[zzr1200]

85/140 gear oil seems ok

Cutting Angle Adjustment; Changing The Disk; Changing The Lubricating Coolant Pump; Routine And Special Maintenance - Thomas 315 SUPER CUT Use And Maintenance Manual [Page 10]

Thomas 315 SUPER CUT Manual Online: cutting angle adjustment, Changing The Disk, Changing The Lubricating Coolant Pump, Routine And Special Maintenance, Daily Maintenance, Weekly Maintenance, Monthly Maintenance, Six-Monthly Maintenance, Oils For Lubricating Coolant. - Release Lever (...

www.manualslib.com

hth

 

[Pete.]

I got a bunch of blades for one of those. What hole do they use in the hub?

 

[Erie Fred]

IIRC it has a brass/bronze worm gear, be careful of the oil, "Extreme Pressure" additives
can erode the light metal parts.
Axle oils (90w and 140w) made for vehicles sometimes has that in it, as the gears are all steel.

 

[harveyp6]

IIRC it has a brass/bronze worm gear, be careful of the oil, "Extreme Pressure" additives
can erode the light metal parts.
Axle oils (90w and 140w) made for vehicles sometimes has that in it, as the gears are all steel.

Use GL4 as it doesn't contain those additives.

 

[Rising.Frequency]

I got a bunch of blades for one of those. What hole do they use in the hub?

32mm

 

[Rising.Frequency]

This stuff suitable?

 

[Agroshield]

The label states it is safe for yellow metals, so yes.