What is this connector

[daviduk123]

What is this connector I need 2 with the socket end. It's for a mobility scooter battery to wiring loom.
Also would anyone know why my mobility scooter motor is not getting power from the board I have 24 volts in to the board but no volts out. I have checked all wiring with a multimeter and all the controls work and the motor works.
Thank you

 

[skotl]

Difficult to tell from these pics, I'm afraid.

How much free cable do you have on the battery? If there's a decent amount you could always replace the socket with another two prong set.

 

[500e]

Is it a Fuse on the Green wire/tie wrap
For the money they are poor build quality I always think,

 

[daviduk123]

Difficult to tell from these pics, I'm afraid.

How much free cable do you have on the battery? If there's a decent amount you could always replace the socket with another two prong set.

It's so I can make up a lead to charge the batteries off the scooter.its £35 + for one lead. It's a normal xlr socket and 18g wire and 2 of the connectors. And then it plugs into the 24v charger.

 

[daviduk123]

Is it a Fuse on the Green wire/tie wrap
For the money they are poor build quality I always think,

Will undo it and check there is a resettable fuse on the white wires. The fuse under the black cover is 2a that's fine as it's for the lights