Corrugated roof lights

[nickk]

Is it acceptable to place them side by side ,as a pair,and have one edge secured under the top surface of the fascia board on a portal frame roof.
This is on the downwind end of the roof,applicable to fibre cement and steel box profile. Thanks.

 

[gaz1]

lets see what you may think first



before note the difference



after

 

[frank horton]

as long as it's fully supported and secure.....why not...

 

[CompoSimmonite]

lets see what you may think first

View attachment 350211

before note the difference

View attachment 350213

after

View attachment 350214

Tears from me. I had to sell my Jensen build P1800 due to cost of repair panels and also broke my old 1800S as a spares donor !

 

[addjunkie]

Its not the norm having them side by side. But dont know why not!

 

[gaz1]

Its not the norm having them side by side. But dont know why not!

you can have 2 side by side like on farm buildings but you need to over strap them as there flimsey and can be caught by the wind if the middle gives due to wear and tear on those plastic panels with sun and movement

single use is used more on domestic propertys

they also have to be warnings around them when working on the roof as you can go through them

 

[nickk]

These are fibre glass,but I put steel support bars under,resting on the purlins.

 

[gaz1]

normally they seperate by one sheet as the other sheets can help to hold the plastic down

https://www.roofgiant.com/resources/files/NTD15-2018.pdf