25.4_mechanic
Member
- Messages
- 1,046
- Location
- Germany, southwest
20 years old so its a project..
I'm sceptical about newfangled stuff like that ...
20 years old so its a project..
Are you using your better half as a food taster first?No I should be ok
she did say only one of us should eat them first, I said right o ill cook them for you!Are you using your better half as a food taster first?
A seller from Israil. In silver.Monopoly pieces ?
Got a link? Fancied a crawler for a while.Been years since I dabbles in RC with the battery improvements it's much more enjoyable these days.
Cheap crawler. Motors on axle and the articulation is phenomenal.
Could do with replacing the 6kg servos with something beefier.
Wheel spacers on route as full lock just fouls the links.
Eventually il make some Ali links swap the shocks and see if I can squeeze brushless motors in the axles.
Plenty of power as is on 2s lion
Il drag my drone 3s lipos out for a test over the weekend
View attachment 345998 View attachment 345999 View attachment 346000
Sent this one back.
Ftx ravine.Got a link? Fancied a crawler for a while.
Mexican Hat Pig Feeders
any good? what you cutting with thoseA friend recomended these button tip cutters, so picked one up today:
View attachment 346215
I was struggling to get a good finish on a Myford Leadscrew shaft, my friend sent me:any good? what you cutting with those
There's some chatter marks in that so must be a fair stickout unsupported, and the CC** insert looks like a cheap one, branded inserts make a good difference (probably why the seco button insert makes a better job)I was struggling to get a good finish on a Myford Leadscrew shaft, my friend sent me:
View attachment 346217
Getting a better finish with a button head tip, so thought I would try one.