steveo3002
Member
- Messages
- 7,675
looking to replace some oem fasteners , theyre an allen bolt with a small flange , is there such a thing outside oem parts ?
- Thread starter steveo3002
- Start date
Craig-SM
Member
- Messages
- 2,056
- Location
- Heckmondwike
try looking for flanged button head screws
www.westfieldfasteners.co.uk
M6 Socket Head Button Screws With Flange ISO 7380 part 2 in A2 Stainless Steel - Westfield Fasteners Ltd
M6 Socket Head Button Screws With Flange ISO 7380 part 2 in A2 Stainless Steel. Typically used where aesthetics are important or for bolting softer materials. Next day Delivery.
steveo3002
Member
- Messages
- 7,675
thanks but i mean cap head with a flange
slim_boy_fat
Member
- Messages
- 29,532
- Location
- Scottish Highlands
dan.taylor.1
General Tinkererer
- Messages
- 2,795
- Location
- Kendal, Cumbria
Flanged Socket Head Cap Screws - BN 1392 & 3873 - ITA Fasteners
At ITA Fasteners, we stock flanged socket head cap screws in varying dimensions and materials for your every possible need. Get a quote now.
itafasteners.com
hotponyshoes
Member
- Messages
- 7,490
- Location
- Somerset. Uk
I looked for some of these a while back.
Common on Nissan's and a few types of motorbike.
About the only ones I could find in the UK were titanium so it was cheaper to order them in packs of 2 from Nissan.
Easily available on ebay from China or quality ones seem to be common in the states but prices were either not listed or there was a minimum order quantity.
Common on Nissan's and a few types of motorbike.
About the only ones I could find in the UK were titanium so it was cheaper to order them in packs of 2 from Nissan.
Easily available on ebay from China or quality ones seem to be common in the states but prices were either not listed or there was a minimum order quantity.
they are about two and a half quid each from BMW ,,, granted in M5 , but handy link , many thanks.try looking for flanged button head screws
M6 Socket Head Button Screws With Flange ISO 7380 part 2 in A2 Stainless Steel - Westfield Fasteners Ltd
M6 Socket Head Button Screws With Flange ISO 7380 part 2 in A2 Stainless Steel. Typically used where aesthetics are important or for bolting softer materials. Next day Delivery.
CompoSimmonite
Member
- Messages
- 5,930
- Location
- Werrington, Staffordshire Moorlands.
Superglue a washer to a standard allen bolt ?
Agroshield
Member
- Messages
- 6,034
There is a vast list of DIN fastener standards here: https://www.fastenerdata.co.uk/din-standard
Unfortunately, the ones you want do not seem to be on it. In the link in the post above, it notes they are made to BN 1392, which sees to be a standard produced by a company called Bossard.
In looking around for the above, I found this, which contains a lot of useful info. http://www.lindstromfasteners.com/wp-content/uploads/2017/06/Lindstrom-Technical-Manual-2017.pdf
Unfortunately, the ones you want do not seem to be on it. In the link in the post above, it notes they are made to BN 1392, which sees to be a standard produced by a company called Bossard.
In looking around for the above, I found this, which contains a lot of useful info. http://www.lindstromfasteners.com/wp-content/uploads/2017/06/Lindstrom-Technical-Manual-2017.pdf
We use lots and lots of them, get them from here: -
www.accu.co.uk
Buy Metric Socket Flanged Button Screws | 500,000+ Components | Accu®
Buy Metric Socket Flanged Button Screws From Accu, The Online Store For Precision Engineers. Over 500,000 Products Available.
www.accu.co.uk
Agroshield
Member
- Messages
- 6,034
The style to which you link was suggested as the initial reply to the OP. The next post stated that this is not the required style. He does not want button head. If Accu do sell what he wants, please provide the correct link.
Aff
Member
- Messages
- 219
- Location
- Weymouth
Plenty of options available on Misumi.
We use Nissan Screw for fasteners when designing non standard stuff, they are usually a good price: https://uk.misumi-ec.com/vona2/detail/221000862955/
You could also go with the integrated washer type which are usually a bit cheaper: https://uk.misumi-ec.com/vona2/detail/221000551411/?rid=rid3
We use Nissan Screw for fasteners when designing non standard stuff, they are usually a good price: https://uk.misumi-ec.com/vona2/detail/221000862955/
You could also go with the integrated washer type which are usually a bit cheaper: https://uk.misumi-ec.com/vona2/detail/221000551411/?rid=rid3
steveo3002
Member
- Messages
- 7,675
Aff
Member
- Messages
- 219
- Location
- Weymouth
I think it depends which Hub its coming from. If you have an exact part number and quantity I can check.
I usually don't even look as we don't pay postage with them but I don't think it will be cheap for a home gamer. (depending on quantities)
steveo3002
Member
- Messages
- 7,675
yeah thanks i will leave it...have to make do with some washers i think
Apologies for my tardiness, they are not from ACCU but from Raptor
Search - Raptor Supplies
www.raptorsupplies.com
Their website is not great on a phone, best on a PC as you can filter for sizes etc.
hotponyshoes
Member
- Messages
- 7,490
- Location
- Somerset. Uk
If they are on the zoro US site try putting that number into the UK site. Sometimes works.
