Motor connector cover

[Johnnybravo]

Any ideas where to get a cover for the terminal connector on a small motor? Suds pump on bandsaw was disconnected before I bought it and cover has gone awol

 

[Chris Snow]

Good luck.. I'd just get a suitably sized plastic IP box and cut the back out of it and fix it on somehow

 

[Johnnybravo]

Good luck.. I'd just get a suitably sized plastic IP box and cut the back out of it and fix it on



Somebody will have one. Or Seems to be the same on the small 1/8hp motors . Held on with one screw.

 

[rikrobson]

a 3d printer will have one

 

[mtt.tr]

I personally swap them out now for an ip box, and motor terminal block.

They dont seem to follow any set size.


Can you post the dims i might have one.

 

[brightspark]

mines the same and cover missing

a 3d printer will have one

its a cover not a formula 1 car with millions of pounds worth of funding a plaggy enclosure will do as above post or if your realy fussy and nothing better to do learn a bit of tin smithing

 

[scottmk1]

If you are not in a hurry I will have a look in the shed when I get home at the end of the month, there's some small NOS motors stashed somewhere.

 

[ranchero]

i made one out of wood