Stuff you have made today

[slim_boy_fat]

C:\Users\Max\Desktop\Max\tenor (2).gif

Are giving or taking.
@slim_boy_fat Vampire, just don't sparkle.

Cheers, but I don't 'do' apps, I'm quite happy being local[ish] where folk know how careful I am when doing/making stuff. And as long as my projects are that bit 'different' they get attention.

 

[Memmeddu]

They had sold one of my horseshoe crabs and want at least one more. Into next year I said, fine they said - I suspect my stuff makes a pleasant change from the usual framed pics of local scenes, knitted stuff, etc....



I'll be posting in the "today I acquired" thread in a few minutes - been a busy boy after being at the Surgery in the morning for my usual bloods.

I love this kind of things, I would like to build one myself
I really struggle with bloods tests, I have to convince myself to go

 

[slim_boy_fat]

I really struggle with bloods tests, I have to convince myself to go

Needles hold no fear for me, I've had them very regularly for the past c. 12 years or so - since the cancer was first diagnosed. If the treatment timing calls for it, I can give myself the injections at home.

I've even had them in my eyes for laser treatment, you don't feel it because they use anesthetic drops first.

But enough on this boring subject , back to the Collective's talents.

 

[Memmeddu]

Needles hold no fear for me, I've had them very regularly for the past c. 12 years or so - since the cancer was first diagnosed. If the treatment timing calls for it, I can give myself the injections at home.

I've even had them in my eyes for laser treatment, you don't feel it because they use anesthetic drops first.

But enough on this boring subject , back to the Collective's talents.

Sorry to read about cancer .
Yep that's enough.

Back to the crabs....
Have you any advice to share with me?
I would like to build a lamp

 

[Hood]

....
Back to the crabs....
Have you any advice to share with me?....

I think you can get cream for that

 

[eLuSiVeMiTe]

Made a skirting fit a very poorly self leveled floor.made good use of the cheap maquee to keep the torrential rain off too.

 

[Memmeddu]

I think you can get cream for that

I wasn't expecting this answer

 

[slim_boy_fat]

This is what I did, E.A.O.E [errors and omissions excepted ]

The main thing is to ensure that the individual LEDs [I used 2 initially to test the level of illumination] don't overheat - contrary to popular belief, in 'one off' builds like this, they can if you feed them too many Amps [?].

I powered mine using an old Nokia phone charger, so 9V DC max - not enough to kill a person so no PAT testing requirement. As I said, soldering has never been a strong point of mine, so the 1mm wires were a bit of a challenge. I had to wire them together to ensure enough even light throughout the shell. Pics don't show it to best advantage, but experimentation will reach a level which pleases you. Mine can be viewed from either side if required.

Also, TEST at every stage, there's no point in assembling it to discover that one flickers etc. I ran them on test for literally hours to ensure that the lamp wasn't going to get even a little bit hot, even to the touch. My pics don't show it, but there's enough of an air gap between the conch shell and the hardwood base.

The rest is up to your imagination. Bases don't' need to be regular rectangles for example - any one which takes your fancy is OK. Similarly, size, shell type, number of LEDs etc - the world is your mollusk of choice....

 

[Olderisbetter]

A gate finished today, its to block of an alley at the side of a factory, not designed to be top security more of a visual deterrent to stop dumping of rubbish, or to deter people who sniff noxious powder and stick needles in themselves, It has to be able to be easily opened from the inside so a fire door pushpad does the job.

Personally the state of the alleyway would be enough to keep me out!


View attachment 203764

View attachment 203765

View attachment 203766

You see an alleyway i see a long thin shed

 

[123hotchef]

I made Christmas dinner for 1200 people today.

 

[123hotchef]

Got the Aluminium delivered just after 12 so onto the plasma with it and cut out some bits.

View attachment 203603 View attachment 203604

Got the davit/web tacked up.

View attachment 203605

I seemed to be getting a lot of soot and the weld was not the most stable. I had noticed this the last day or so I was up at the Cat. Welds were ok but just not as nice as they should be. I checked the gas flow with the peashooter and it was fine, so started messing with inductance, voltage trims etc but still just wasn't right. I then discovered this.

View attachment 203606

The diffuser must have cracked and broken due to the heat and although I was getting 17LPM flow it was not being diffused correctly and thus giving me the problems.

Welds after that were back to normal although I had to tweak things that I had previously adjusted to get back to where I was happy.

View attachment 203607

Have as much done as I can today as I will have to go and test fit on the boat tomorrow as I will have to offset the lower section due to the shape of the boat.

View attachment 203608

I didn't realise u mig welded your Ali I just assumed u tiged it

 

[The_Yellow_Ardvark]

Got this small bundle the other day.

A few days in the de rusting tank. The rust was all but gone. Then through the blackening kit.

The hand vice was seized.
The screw was bent and the jaws did not open. But a bit of heat and oil had them in bits.



The punch was sharpened on the inside edge, as they were originally, they have been tried out to cut leather for washers.

 

[steviec_lj]

Spent a few hours on the lathe this afternoon making an MT4.5 shank ER40 collet chuck. You can't buy them (or anything else MT4.5) and I've wanted one for a while, so I decided it was time and got on with it:

View attachment 203741

The little piece in the bottom left corner is just a slug of steel with an M28×1.5 thread on the outside and an M10 thread on the inside. The collet chuck has the same M28×1.5 thread in the back, so if I put the insert in, I can hold the chuck in place with a draw-bar. If I'm not taking especially heavy cuts, I can remove the insert (and draw-bar) and the collet chuck then has a 26 mm through bore. I would have preferred a 30 mm through bore to match the maximum size of the ER40 collets, but I didn't think it left enough steel for comfort in the MT4.5 bit.

I don't usually take action shots, but the little stepper motor was doing a fine job cutting the taper for me, so I thought what the heck?

View attachment 203742

Oh I like that, I may have to drop you a PM at some point for instruction, or just to blag you in to making one for me

Believe my Kerry is MT4.5

 

[jimbo84]

Made a skirting fit a very poorly self leveled floor.made good use of the cheap maquee to keep the torrential rain off too.
View attachment 203790 View attachment 203791 View attachment 203792

Good use of the transformer as a weight for the gazebo too

 

[stuvy]

I didn't realise u mig welded your Ali I just assumed u tiged it

As in spool gun?

 

[eLuSiVeMiTe]

Good use of the transformer as a weight for the gazebo too

Works well. Bungee to the tranny and one to the saw bench and didn't go anywhere despite the wind.
Best 50 quid spent this winter.

 

[Hood]

I didn't realise u mig welded your Ali I just assumed u tiged it

All the heavier stuff is Mig welded or at least the vast majority. It would simply take too long to Tig it and personally I think Mig is stronger.

 

[Seadog]

Made a skirting fit a very poorly self leveled floor.

Poorly levelled"," that's an understatement if ever I saw one

 

[Hood]

Poorly levelled"," that's an understatement if ever I saw one

Not really, it was levelled whilst in the middle of the North Sea in a hurricane force storm

 

[eLuSiVeMiTe]

Poorly levelled"," that's an understatement if ever I saw one

Lol yes.
That's what came off. Cloth taped to the back of mdf Scotia then 30mm of sealant on front.
Big humps around the pipes and a ramp into the doorway.