bigegg
Scream Not Working Because Space Make Deaf
- Messages
- 9,679
- Location
- Leeds, West Yorkshire
I'd be tempted to build a frame, and turn the plates into a welding table
- Thread starter monkeymark
- Start date
I'd be tempted to build a frame, and turn the plates into a welding table
Hopefuldave
Intergalactic pot-mender
- Messages
- 2,541
- Location
- The Shed of Danger, surrey, England
I've already got one, 10mm stainless top about 1200 x 1200mm... Lucky it's stainless as the Garage of Danger is a bit cramped and it has to live outside
Dave H. (the other one)
Hopefuldave
Intergalactic pot-mender
- Messages
- 2,541
- Location
- The Shed of Danger, surrey, England
eLuSiVeMiTe
Member
- Messages
- 16,439
- Location
- ......
Had a bit of a mixer disaster when I was putting the shed floor down when the mixer seized, but all better now as I've scrounged an electric one off Freecycle. No stand, but its a Belle like my old one so I'll use that. Its an old one so there's loads more metal in it, could be a bit of a scort to get it up on the stand...
eLuSiVeMiTe
Member
- Messages
- 16,439
- Location
- ......
Had a bit of a mixer disaster when I was putting the shed floor down when the mixer seized, but all better now as I've scrounged an electric one off Freecycle. No stand, but its a Belle like my old one so I'll use that. Its an old one so there's loads more metal in it, could be a bit of a scort to get it up on the stand...
Have one like that. Stand differs from the newer ones a bit iirc. Big heavy lump but far better than there newer offerings.
slim_boy_fat
Member
- Messages
- 29,508
- Location
- Scottish Highlands
A quick follow-on question. How often can the bath be used until it becomes depleted and stops working?
Worked a treat on those horseshoes.
bigegg
Scream Not Working Because Space Make Deaf
- Messages
- 9,679
- Location
- Leeds, West Yorkshire
A quick follow-on question. How often can the bath be used until it becomes depleted and stops working?
Worked a treat on those horseshoes.
i've had about 75l + 2kgs powder in a blue plastic barrel since summer, pickling various bits + pieces (a couple of big! vices, a load of horse shoes+a fair amount of small hand tools).
it seems to be losing its efficacy - no bubbles when putting new stuff in, but it *is* winter - stuff is still coming out de-rusted.
Olderisbetter
Member
- Messages
- 3,938
- Location
- Wolverhampton
I use mine over and over till it stops workingA quick follow-on question. How often can the bath be used until it becomes depleted and stops working?
Worked a treat on those horseshoes.
fixerupper
Member
- Messages
- 1,682
- Location
- Crete Greece
Last week some unpleasant person nicked our rotivator from the vegetable plot that is about a kilometre out of the village ...it's a secluded place and I stupidly thought it was OK to leave it there tucked under an olive tree with a bit of plastic tied over it ...its about 12 years old and cost 1200 euros ...so I was miffed . I thought that kind of thing just did not happen here...However a friend of mine rang me up yesterday and he has one that was his dads and I can have it. It is old ,...so I have a project ...the tank was left full of fuel and it turned it to soup and the carb is thick with goo like varnish... I took the tank and the carb off and cleaned them out ...the tank tap had seized up I've got it soaking overnite ...I cleaned up the plug and turned the engine over and got a spark ...so I think it's gonna be ok...it not as powerful or robust a machine as the one that got stolen but for free ...thank you Evaggelos Garefalakis....
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 20,333
- Location
- Going Away.
Post No. 13725.
About 90 minutes work and a pressure wash had this Pallet truck working nicely.
Some one had let the oil out of the pump mechanism. I had to spend £6:75 on a bottle of oil. Ok I did spend it in a local shop.
It has now been sold on to a friend of a friend who has some stables and the bales of saw dust arrive on pallets.
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 20,333
- Location
- Going Away.
I have mentioned in the past a local charity shop which I visit will make up box's of stuff they can not easily sell.
The box's are normally household box's, garden, DIY or pot luck.
I tend to take a punt on DIY or garden. If I don't like the contents I let the shop have it back and let them sell on again. Yes, they keep my money.
Today I "risked it for a biscuit" and went for a "pot luck" box.
£5:00. Was the suggested price. I gave double.
It rattled and was unbalanced.
Camping Gaz Hose and regulator. @Parm Yes you do recognise it. But it was no use to us both. I donated it to the shop.
Hose lock Nozzle and hose pipe connector
Ratchet bit holder.
Paint brushes
9 D shackles and a wire tensioner.
Not bad.
But wait. There is more.
Mrs TYA likes the fact I donate, but not the "Dam clutter"
2 double 13amp metal wall sockets, junk pile already.
Head torch, rechargeable batteries and it works too boot.
2 Tape measures, I keep one, the other is down in MIS.
Timer Plug adapter.
Stanley small bubble stick.
More Hose adapters.
Led torch.
No.2 Phillips.
2 pairs of gloves.
Claw hammer.
I think it was worth the punt.
The box's are normally household box's, garden, DIY or pot luck.
I tend to take a punt on DIY or garden. If I don't like the contents I let the shop have it back and let them sell on again. Yes, they keep my money.
Today I "risked it for a biscuit" and went for a "pot luck" box.
£5:00. Was the suggested price. I gave double.
It rattled and was unbalanced.
Camping Gaz Hose and regulator. @Parm Yes you do recognise it. But it was no use to us both. I donated it to the shop.
Hose lock Nozzle and hose pipe connector
Ratchet bit holder.
Paint brushes
9 D shackles and a wire tensioner.
Not bad.
But wait. There is more.
Mrs TYA likes the fact I donate, but not the "Dam clutter"
2 double 13amp metal wall sockets, junk pile already.
Head torch, rechargeable batteries and it works too boot.
2 Tape measures, I keep one, the other is down in MIS.
Timer Plug adapter.
Stanley small bubble stick.
More Hose adapters.
Led torch.
No.2 Phillips.
2 pairs of gloves.
Claw hammer.
I think it was worth the punt.
seriesonewelder
Member
- Messages
- 671
- Location
- West Midlands
In another thread a few days ago there was mention of Rutlands, I'd not had a look on there for a while so I had a mooch. 8 piece chisel set for £19.95, £10 off normal price.
https://www.rutlands.co.uk/sp+set-of-8-bevel-edge-chisels-with-split-proof-handles+M5008
https://www.rutlands.co.uk/sp+set-of-8-bevel-edge-chisels-with-split-proof-handles+M5008
Edit - in the thread about clamps - Thanks to who it was for mentioning Rutlands
I've dug the boxford headstock out of the scrap, and bought an xy cross slide. I'm thinking a frame from a bit of rsj, swivel base for the cross slide. Not sure how to do height adjustability or holding the tooling yet. Collet chuck sounds an expensive way, but I can't see much choice.
A pic or two would be good, when you get a moment.
Thanks.
brightspark
Member
- Messages
- 41,358
- Location
- yarm stockton on tees
could have got one of those for 800 quid
it had more than that spent on it . our lass didn't like it so I never got it 
useless cow I should have put me foot down I would have still had it if I did and worth a fortune 
them were the years you could pick stuff up cheap . at that time I bought a 650 Norton ss for 40 quid 
I still have it
eLuSiVeMiTe
Member
- Messages
- 16,439
- Location
- ......
Look very much like some of my Irwin's.
Have 3 sets of chisels already but very nearly clicked on the link to buy another set.
eLuSiVeMiTe
Member
- Messages
- 16,439
- Location
- ......
Well 5 sets but 2 are cheapos I abuse on nails and concrete.
About due another sharpening session.
