- Thread starter monkeymark
- Start date
slim_boy_fat
Member
- Messages
- 29,508
- Location
- Scottish Highlands
No idea about the cider, but is that made by Morso in Sweden by any chance? If so, they ain't cheap...
bigegg
Scream Not Working Because Space Make Deaf
- Messages
- 9,681
- Location
- Leeds, West Yorkshire
bigegg
Scream Not Working Because Space Make Deaf
- Messages
- 9,681
- Location
- Leeds, West Yorkshire
No idea about the cider, but is that made by Morso in Sweden by any chance? If so, they ain't cheap...
mine isn't - or at least it's not marked so.
and it's practically identical to the one in the picture:
the thumbscrews, the wire "handle" and the contour/profile of the lever/handle are all the same.
there is another make, I think: "orteguil"???
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 20,338
- Location
- Going Away.
pressbrake1
Member
- Messages
- 5,748
- Location
- Essex
Could you check if my gap for the Lang is there please
maz0
Member
- Messages
- 716
- Location
- Central Scotland
Wheres the pic of you on its back?
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 20,338
- Location
- Going Away.
No idea about the cider, but is that made by Morso in Sweden by any chance? If so, they ain't cheap...
No idea the make, had a quick play.
But I needed food.
Memmeddu
Member
- Messages
- 5,548
- Location
- Italia Sardegna
As eletrician I love this thingsReference. Page 282.
Post No. 11683
Date. 27th October 2018.
The Pup of the Avo.
View attachment 165441
I raised an E Bay complaint.
Guess what, they sided with the guy who had sold this. He claimed it was in good condition and fully working. Normal rubbish they spout when then have been found out.
I contacted E bay again, showing pictures of the undamaged packaging and a statement that UPS had delivered it undamaged. Plus I had supplied pictures that all the Anti Tamper seals and Anti tamper paint had bean broken.
The ring you see (1 of 3 loose) is from the Needle Zero adjusting screw. The one above the AVO logo.
Just before Christmas, E bay conceded the damaged was "Pre delivery." Thus not by transit damaged and the seller knew it was not as advertised. I got a refund. Not including P&P. I complained again and they have now refunded all my costs.
So.
Why this ambling rant?
Today I got a parcel.
View attachment 165442
In the parcel was a box.
View attachment 165444
Well made, dove tail joints and brass hinges. Just let down by a catch.
Inside the box.
View attachment 165443
A Fully working Mini AVO Mk4.
New leads, new battery and a not saying the Ohms reading was out. But I knew that.
It is fully working and a quick tweak of the Ohms Zero adjust we are away.
paulmitchell1984
Member
- Messages
- 842
- Location
- Leeds
Ask my local landlord if he had any kegs he couldn't send back and hey presto these emerged from the deep dark cellar, initially I thought they would be stainless so offered to make him a bbq from one, however I think they may be ally which has screwed me over a bit (dont own an ac tig) and melting point will be too low...grr
WorkshopChris
Member
- Messages
- 5,049
- Location
- South East Essex
Watch out they will still be owned by someone. https://www.kegwatch.co.uk/
paulmitchell1984
Member
- Messages
- 842
- Location
- Leeds
Correct, however 3 are from a now closed brewery and ther 2 have been sat for approx 2 years and after numerous calls the still havnt collected so I'm clear
Dieselman 63
Forklift Certified
- Messages
- 5,853
- Location
- Wellington, New Zealand
The missing piece of the puzzle, a Record 52A. These are bloody hard to find, unlike the 52 which is very plentiful. I now have a matching 52A and 53A. The A models had a screw cover which stops crap getting in and clogging it up. Time to build that bench!
Memmeddu
Member
- Messages
- 5,548
- Location
- Italia Sardegna
What is it?
Hood
I am obsessed.
- Messages
- 17,788
- Location
- Carnoustie, Scotland
Chinese diesel fuelled heater.
Parm
Respect The Sound System
- Messages
- 18,019
- Location
- Towcester
New landlord of Village pub has been clearing out some old stuff. Previous incumbent was doing some dodgy stuff. A lot of barrels aren’t on the system, as they don’t have a paperwork trail they can’t go back. He was told to dispose of them. He gave me a couple of pints to take them away. I have 10 in total, all different sizes
Next up had a phone call from a mate who works for a big hire firm. They have first dibs on old hire kit when it’s taken off the fleet. It’s been fully serviced, cleaned and PAT tested, oh he gave it to me FOC
Next up had a phone call from a mate who works for a big hire firm. They have first dibs on old hire kit when it’s taken off the fleet. It’s been fully serviced, cleaned and PAT tested, oh he gave it to me FOC
Memmeddu
Member
- Messages
- 5,548
- Location
- Italia Sardegna
Today I got for free
Bosch gsh 11 e
Armature failure ,switch and controller missing
Bosch jig saw (don't know what's the problem yet)
Makita concrete mixer
I think is only a ball bearing
Makita heat gun
Main control board failure
Makita HK0500
I think is only grease or switch problem
Berner diamond saw to put pipes and wire under the concrete ,do not have idea of how it's named in English
9" Chinese angle grinder
Switch failure
Black and decker drill (always the same problems with carbon brush holders )
I will take from it the bearing for the mixer
Was looking for the makita heat gun ,and the sds plus demolition hammer ....
But now I have them
Later I will repair the makitas at least
Later I think that I will post some pictures also of the würth BMH 5-40 SE of the other day which I forgot to do and tell you about about a free 30mm sds max drill bit into the wurth transport case
Bosch gsh 11 e
Armature failure ,switch and controller missing
Bosch jig saw (don't know what's the problem yet)
Makita concrete mixer
I think is only a ball bearing
Makita heat gun
Main control board failure
Makita HK0500
I think is only grease or switch problem
Berner diamond saw to put pipes and wire under the concrete ,do not have idea of how it's named in English
9" Chinese angle grinder
Switch failure
Black and decker drill (always the same problems with carbon brush holders )
I will take from it the bearing for the mixer
Was looking for the makita heat gun ,and the sds plus demolition hammer ....
But now I have them
Later I will repair the makitas at least
Later I think that I will post some pictures also of the würth BMH 5-40 SE of the other day which I forgot to do and tell you about about a free 30mm sds max drill bit into the wurth transport case
gaz1
Member
- Messages
- 20,336
- Location
- westyorkshire
parm becareful with that it has no soft start as i have the same model
that model has pulled me into the ground when cutting a flag up before it blew the 13 amp fuse it had in
hold it tightly it has a kick on start up and only place it down when it stops spinning
that model really does the work hard
that model has pulled me into the ground when cutting a flag up before it blew the 13 amp fuse it had in
hold it tightly it has a kick on start up and only place it down when it stops spinning
that model really does the work hard
