Where can I buy a banjo cap nut M14 1.5mm thread in the UK

[RaceDiagnostics]

Anyone know a UK seller.

Something like this.

https://www.ebay.co.uk/itm/Banjo-Bo...536540?hash=item25cd8fb25c:g:VKQAAOSwx-9W02dO

 

[Seadog]

They used to be called Dome Nuts when I was a lad

 

[normspanners]

https://www.merlinmotorsport.co.uk/...MI4NH-6bTR2wIV573tCh15UAixEAQYAiABEgLAIvD_BwE

 

[DaveB]

Try Think Automotive

That's probably where Merlin Motorsport would get it from.

 

[steveo3002]

bet the uk postage is as dear as usa

 

[8ob]

Think Automotive in Isleworth Ref Ref: BCA2-55 https://www.thinkauto.com/acatalog/Metric__swivel.html

Bob

Edit : Need to type faster

 

[RaceDiagnostics]

Merlin don't have M14, but "Think Automotive" do, but ten quid + postage it a bit of a rip off.

Also the arithmetic on their web site is a bit dodgy, both the VAT and the total are wrong.

Any dome nut will do as long as its M14 1.5mm pitch, but they don't seem that common.

 

[brightspark]

here ive bought of them before https://stainlessmiddleton.co.uk/152-nuts-domedall my nuts and bolts on my bike are stainless

 

[normspanners]

That is weird I put in m14 it showed an M14 and if you see the link it even says m14 ??

 

[jsf55]

is this any good
https://www.ebay.co.uk/itm/Burnett-...hash=item362897710f:m:mLUHRGXCjc-HARrHJo7BHeA

 

[Gregwalker1981]

https://www.trfastenings.com/products/Catalogue/Nuts/Cap/Standard

 

[normspanners]

how about chrome cap wheel nut many are 14x 1.5 and machine the nut flat
probably get one from scrap yd

 

[Johnseat]

Can I ask why you want one? May have one at work.

 

[RaceDiagnostics]

is this any good
https://www.ebay.co.uk/itm/Burnett-...hash=item362897710f:m:mLUHRGXCjc-HARrHJo7BHeA

Bingo, and only £2.73.

Its to cap off a port on a fuel accumulator, I managed to buy the wrong one with two ports, see pic below. I just need to cap off the other one. To buy the correct accumulator would cost another £170.

Hopefully the one above with some thread lock will do the job.

 

[Ton-up]

Put a ball bearing in it as well.

 

[normspanners]

Bingo, and only £2.73.

You sure look at the pitch looks like std 2mm pitch to me

 

[normspanners]

For what you need if you go to a hydraulic place and get a 14mm std nut and use a ball brg as said

 

[RaceDiagnostics]

You sure look at the pitch looks like std 2mm pitch to me

The description says 1.5mm, anyway I ordered one so I'll find out when it arrives now.

 

[scottmk1]

What is the accumulator for?

 

[normspanners]

The description says 1.5mm, anyway I ordered one so I'll find out when it arrives now.

where?
edit; this is weird the link above said m14 then changed it to m12, now this link took me to a plain manufacturers site showing no pitch, now its taking me to ebay and that item IS stating 1.5 pitch ?????
maybe my puter getting links mixed ???
HUM its just been windows flippedup dated and the net is acting up and slow
just found the link------ this is the link it was taking me to https://www.trfastenings.com/products/Catalogue/Nuts/Cap/Standard
which was already in open in memory ??