What are These?

[Turbo]

Approx 40mm dia & 40 long.
They are like the things used to fit curtain poles but I bought them from a sale where most of the stuff was for fitted kitchens & plumbing.

Also have a load of these.

Insert for a mixer tap?

 

[Johnnybravo]

Mixer tap insert. Correct.

 

[Kram]

Hot glue dent pullers for the first ones?

 

[Dev]

Approx 40mm dia & 40 long.
They are like the things used to fit curtain poles but I bought them from a sale where most of the stuff was for fitted kitchens & plumbing.

I wonder if they're for something like attaching countertops to the top of kitchen cabinets...

 

[Maker]

They look a bit like the concealed hardware you have on "Floating shelves", but probably too small. Maybe something along those lines though, a towel rail or something. Screw a pair of shafts to the wall, slip the fitting over it and tighten an out of sight grub screw into the necked down portion to hold it in place.

 

[Agroshield]

Maybe something along those lines though, a towel rail or something.

They are similar to towel rail holders and toilet roll holders but... ...why are they hexagon-shaped and why do they have two grooves? These things are costed to fractions of pennies so the hex stock and two grooves need a purpose.

 

[Maker]

Maybe they're universal, the hex is an anti-rotation feature for things like roll holders where there's only one bracket, and two grooves are so they can be used on different products with grub screws in different positions.

Someone will be along in a minute who knows exactly what they are.

 

[Bullet2012]

knows exactly what they are.

It’s lots more of those things that you keep for ages and only need a week after you throw them away.

 

[500e]

Kerox KDZ 35 On/Off Flow Cartridge

Kerox KDZ 35 On/Off Flow Cartridge (KDZ35)Kerox KDZ 35 Technical Information Total Height: 58.

www.divapor.com

 

[Turbo]

It’s lots more of those things that you keep for ages and only need a week after you throw them away.

I bought another 2 lin bins of these so now I have a lot of them! Only bought them for the bins, the contents were a bonus!

Trying to think of an alternative use for them & the only thing so far is coat hangers!

Mixer tap insert. Correct.

View attachment 344788

I didn't realise they were so expensive! I've got a lin bin full, might chance them on ebay.

 

[Turbo]

Kerox KDZ 35 On/Off Flow Cartridge

Kerox KDZ 35 On/Off Flow Cartridge (KDZ35)Kerox KDZ 35 Technical Information Total Height: 58.

www.divapor.com

How much!!!

I'm sitting on a fortune!

 

[Johnnybravo]

Maybe they're universal, the hex is an anti-rotation feature for things like roll holders where there's only one bracket, and two grooves are so they can be used on different products with grub screws in different positions.

Someone will be along in a minute who knows exactly what they are.

The annoying thing is,I have seen those before. Just cannot remember where or what they are for.
Might have been at the company that does my electroplating…