Slip rolls for 3mm plate

[God mode restorations]

Evening chaps.
Just a random question. Has anyone local to Essex have or got access to a large set of slip rolls or a procam folder to acomadate a large piece of 3mm plate. Length is 74 inches. I need to roll two sides with a tight radius. How tight I am not sure because I don't no what's the tightest I can get with 3mm plate. I don't need it done yet but like to make near future preparations.

 

[gaz1]

If a tight fit below 8" just buy tube instead

 

[Hitch]

If it's really tight, you'll be restricted by the diameter of the top roll.
Step bending, or using radiused top tooling in a press brake is how I'd probably be doing it, if it's less than iro 100mm...

 

[God mode restorations]

If a tight fit below 8" just buy tube instead

Yes. I could do it that way. A good idea.

 

[God mode restorations]

If it's really tight, you'll be restricted by the diameter of the top roll.
Step bending, or using radiused top tooling in a press brake is how I'd probably be doing it, if it's less than iro 100mm...

The last lot I did was on a massive press brake. The old chap that operated that department I used to get on well with. And I used the machine with his supervision .But he has retired so that's out of the question. The company would probably do it for me if I asked