Needed something to go over swamp and snow while moose and deer hunting. 4 wheeler I have, just did not have something I was happy to pull behind over swamps and frozen snow.
After much thinking and lots of beer, I came up with this idea that old heating oil thanks, if helped by some square and round tubing did not have to end in landfill!
This is my last project; i am no professional welder... actually, I stated this project to learn stick welding but after a bad start, I've gone back to MIG. I thought myself welding... be indulgent as I am heading out to college night couse to become better.
Anyway, here is "the tub" as it was nickname. It was built out of an old oil tank cut in "L" shape and welded topgether after both end were put back together. "T" bars serve as gliders, square tubing as re enforcement and round tubing was used for the "thong". The thong has springs to soften the pull and pushes and it can rotate 360 to avoid snap off from the tow ball.
Again, this is not a how to show off.. I need to learn a lot moore about welding. Just posted for an idea to other rednecks outhere
After much thinking and lots of beer, I came up with this idea that old heating oil thanks, if helped by some square and round tubing did not have to end in landfill!
This is my last project; i am no professional welder... actually, I stated this project to learn stick welding but after a bad start, I've gone back to MIG. I thought myself welding... be indulgent as I am heading out to college night couse to become better.
Anyway, here is "the tub" as it was nickname. It was built out of an old oil tank cut in "L" shape and welded topgether after both end were put back together. "T" bars serve as gliders, square tubing as re enforcement and round tubing was used for the "thong". The thong has springs to soften the pull and pushes and it can rotate 360 to avoid snap off from the tow ball.
Again, this is not a how to show off.. I need to learn a lot moore about welding. Just posted for an idea to other rednecks outhere







