Recommendations for good steel cutting reciprocating saw blades

[Fintray]

Looking for your recommendations on good steel cutting blades for a reciprocating saw (I have a mains powered one). About to getting working on my rusty Range Rover and will need to cut out thin metal sections but also cut off some bolts that the grinder can't get in about to.

 

[eLuSiVeMiTe]

Saxton and shark blades.

 

[123hotchef]

i got some from toolstation forget the brand but they did well on bush sleeves

 

[gaz1]

abracus reciprocating saw blades we use them on cutting the pins on landrovers

 

[Fintray]

Guys many thanks for your recommendations, I've sent for some of the Saxton ones as have used their multi-tool blades in the past which have been good but keeping in mind the other suggestions.

 

[Pete.]

I'm looking for a good carbide tipped blade to try out. My gang have used nearly a thousand Hilti recip saw blades since November.

 

[slim_boy_fat]

My gang have used nearly a thousand Hilti recip saw blades since November.

How big is your gang?

 

[Pete.]

How big is your gang?

Why you wanna be in it?

I think we have 5 or 6 recip saws on site, mind you they get through a couple of those a week too. These demo strip-out guys use everything on full speed it burns up blades like you wouldn't believe. They just started chopping out about 400m of 3" steel pipe so I have ordered another pack of 200 blades. I'm trying to convince the purchasing dept to try carbide ones but all they see is the £30-a-pop cost.

 

[slim_boy_fat]

Why you wanna be in it?

Much as I appreciate your offer , I'm going to have to pass - the travelling would be a killer.

 

[gt6s]

Do you wanna be in my gang my gang ? Gary Glitter wants to know will these saws work on prison bars ?

Laurence

 

[123hotchef]

Do you wanna be in my gang my gang ? Gary Glitter wants to know will these saws work on prison bars ?

Laurence

 

[Pete.]

Funny thing happened today. We're stripping out pipework over 6 floors and I had walked the floors with the site manager. We agreed that any pipework with obviously open ends was redundant and could be chopped out, so I relayed this to the demo gang. They did floor 6 and 5 yesterday, floor 4 and 3 today - really cracking on with it.

Unfortunately someone neglected to tell me that the M&E contractor would be busy hanging all new sprinkler pipework on level 3, starting yesterday afternoon. Guess where all his newly-hung pipework is now? Yep - in the metal bin

 

[eLuSiVeMiTe]

Funny thing happened today. We're stripping out pipework over 6 floors and I had walked the floors with the site manager. We agreed that any pipework with obviously open ends was redundant and could be chopped out, so I relayed this to the demo gang. They did floor 6 and 5 yesterday, floor 4 and 3 today - really cracking on with it.

Unfortunately someone neglected to tell me that the M&E contractor would be busy hanging all new sprinkler pipework on level 3, starting yesterday afternoon. Guess where all his newly-hung pipework is now? Yep - in the metal bin

Quality.
Bet there not happy.

 

[123hotchef]

Funny thing happened today. We're stripping out pipework over 6 floors and I had walked the floors with the site manager. We agreed that any pipework with obviously open ends was redundant and could be chopped out, so I relayed this to the demo gang. They did floor 6 and 5 yesterday, floor 4 and 3 today - really cracking on with it.

Unfortunately someone neglected to tell me that the M&E contractor would be busy hanging all new sprinkler pipework on level 3, starting yesterday afternoon. Guess where all his newly-hung pipework is now? Yep - in the metal bin

any spare pipe work need some BBQ legs

 

[steve_s]

I use bosh ones not the cheapest but last well for me
These https://www.screwfix.com/p/bosch-s922ef-reciprocating-saw-blades-150mm-5-pack/62700

 

[armalites]

Why you wanna be in it?

I think we have 5 or 6 recip saws on site, mind you they get through a couple of those a week too. These demo strip-out guys use everything on full speed it burns up blades like you wouldn't believe.

I bet if they hold a cup of tea there is a permanent ripple on the surface after using a reciprocating saw all day