Hi I have a question regarding the power supply for the Parweld XTM 252i.
Attached photos are the user manual technical details and the information on the welder case.
For the power supply requirements I would have assumed the following calculation to be the draw current.
26.5V x 250A = 6625W
6625W / 230V = 28.8A
So with a maximum 28.8A I would propose a 32A three pin commando plug and the power supply protected by a 32A breaker.
However the data also noted Imax of 45A whilst the user manual states a fuse rating of 45A.
This is a little confusing. Does anybody know what the 45A is for?
Attached photos are the user manual technical details and the information on the welder case.
For the power supply requirements I would have assumed the following calculation to be the draw current.
26.5V x 250A = 6625W
6625W / 230V = 28.8A
So with a maximum 28.8A I would propose a 32A three pin commando plug and the power supply protected by a 32A breaker.
However the data also noted Imax of 45A whilst the user manual states a fuse rating of 45A.
This is a little confusing. Does anybody know what the 45A is for?