PLEASE HELP ME!! FAULTY PLASMA CUTTER!!!!

[HELP ME PLEASE!]

Hi my name is jordan and i was in my dads workshop and the R Tech P30C Plasma Cutter just stopped kicking out air and every time i pressed the trigger it made a sound from inside the box like a beep.
PLEASE HELP ME as i dont want to break this cutter as it is new and expensive to us!! PLEASE HELP!

 

[Robotstar5]

Have you got a manual for it showing what lights should (or shouldn't) be on the control panel?
Is there any air getting to the machine - compressor stopped, pipe fell off etc.

...and welcome to the forum.

 

[the snooper]

is the warning light on ?

 

[the snooper]

No output - Power light is lit - Warning light is lit

Welding application may have exceeded recommended duty cycle, allow machine to cool down until the warning light goes out.

 

[Robotstar5]

No output - Power light is lit - Warning light is lit

Welding application may have exceeded recommended duty cycle, allow machine to cool down until the warning light goes out.

It's a Plasma cutter though

 

[the snooper]

It's a Plasma cutter though

dont tell me, i know that, i just copied and pasted , tell who ever printed the manual

 

[penfold]

If the air pressure has dropped below a certain point it won't fire.

 

[HELP ME PLEASE!]

If the air pressure has dropped below a certain point it won't fire.

I will check thanks

 

[HELP ME PLEASE!]

is the warning light on ?

I will check

 

[HELP ME PLEASE!]

Hi my name is jordan and i was in my dads workshop and the R Tech P30C Plasma Cutter just stopped kicking out air and every time i pressed the trigger it made a sound from inside the box like a beep.
PLEASE HELP ME as i dont want to break this cutter as it is new and expensive to us!! PLEASE HELP!

Thanks for all replies i will check if any of these are it

 

[HELP ME PLEASE!]

If the air pressure has dropped below a certain point it won't fire.

THANKS SO MUCH! You was right!

 

[the snooper]

THANKS SO MUCH! You was right!

good stuff, so not broken, must remember to switch compressor on

 

[skotl]

Hi my name is jordan and i was in my dads workshop and the R Tech P30C Plasma Cutter just stopped kicking out air and every time i pressed the trigger it made a sound from inside the box like a beep.
PLEASE HELP ME as i dont want to break this cutter as it is new and expensive to us!! PLEASE HELP!

Jeez - that was a lot of drama.Glad you got it working again, but just call r-tech next time.

Welcome to the forum, I guess.

 

[GW8IZR]

Jeez - that was a lot of drama.Glad you got it working again, but just call r-tech next time.

Welcome to the forum, I guess.

I read this and immediately thought 'I got to fix this before dad gets back'

Which transported me back to my youth and exploring my dad/grandads sheds :-)

Glad it worked out though.

 

[the snooper]

Jeez - that was a lot of drama.Glad you got it working again, but just call r-tech next time.

Welcome to the forum, I guess.

Do you think they would be open at 21:31 and before his dad got back and rumbled him

 

[Gareth0123]

I'm more interested in knowing if Jordan's dad is member on here, and if he's read this thread.

 

[ajlelectronics]

I read this and immediately thought 'I got to fix this before dad gets back'

Which transported me back to my youth and exploring my dad/grandads sheds :-)

Glad it worked out though.

I read it and immediately thought "What a **********" ;-)

 

[Bladevane]

Me too. It transported me back in time 50+ years with the words "Wait till your Dad gets home" ringing in my ears.

 

[the snooper]

I read it and immediately thought "What a **********" ;-)

behave