Painting paving slabs

[owas]

Promise this will be the last gardening thread

I want the concrete paving slabs to be a nice uniform colour,

After a good clean, will this stuff adhere well?

https://www.screwfix.com/p/no-nonse...wT0-0OXW59GnZxt9ddbzzjTy1G210QVMaAieDEALw_wcB

Neighbor said I can have his driveway, so I don't need to park a car on it anymore , just foot traffic

 

[Shedendman]

Wheres the slabs,outside i take it?
If so i'd say no,not unless you prime them.
If it were me i'd head for a more factory floor covering,ie polyurethane based,again still may need priming,BUT,costs
For the price of the stuff you linked,cheap yer,but will it last

 

[grim_d]

You know how when you splatter fence paint on your slabs and once it's dry it's a nightmare to remove?

https://www.screwfix.com/p/ronseal-one-coat-fence-life-charcoal-grey-9ltr/581gf

I've painted a load of concrete bits and bobs with this stuff in black...works great, cheap as chips and needs no prep apart from being clean.

Bonus it's not glossy either.

 

[owas]

You know how when you splatter fence paint on your slabs and once it's dry it's a nightmare to remove?

https://www.screwfix.com/p/ronseal-one-coat-fence-life-charcoal-grey-9ltr/581gf

I've painted a load of concrete bits and bobs with this stuff in black...works great, cheap as chips and needs no prep apart from being clean.

Bonus it's not glossy either.

I have some of that, I'll test it on a slab in the back and see how it turns out.
The glossy part is what is putting me off abit on painting, want it uniform but to blend in.

 

[grim_d]

I have some of that, I'll test it on a slab in the back and see how it turns out.
The glossy part is what is putting me off abit on painting, want it uniform but to blend in.

Blend into what? The tarmac?

The Tudor black Oak dries a nice Matt black which would match tarmac pretty well.

Edit..here's one I painted with it.

 

[Shedendman]

You know how when you splatter fence paint on your slabs and once it's dry it's a nightmare to remove?

https://www.screwfix.com/p/ronseal-one-coat-fence-life-charcoal-grey-9ltr/581gf

I've painted a load of concrete bits and bobs with this stuff in black...works great, cheap as chips and needs no prep apart from being clean.

Bonus it's not glossy either.

I'd go for that,at least jack frost wont lift it unlike other coverings

 

[owas]

Blend into what? The tarmac?

The Tudor black Oak dries a nice Matt black which would match tarmac pretty well.

Edit..here's one I painted with it.

View attachment 184594

Not blend in to the tarmac, but like something that doesn't make it stand out too much? I imagine the floor stuff might be too glossy, if that makes sense

I've just put abit of the ronseal down on a slab in the back, think this will do the job

 

[pedrobedro]

Just spill some old engine oil on them it'll last for years