Hi, new to the forum registered to try get some info on my old oxford mig. Today it stopped feeding I cleaned up the contact relay and it fed maybe an inch then failed again. Now the main contact relay is in the closed position as soon as welder is switched on i can pry it apart and it flicks back to contact so the circuit is closed im guessing the control board has issues. The board is a mig master 2. anyone know where i can get a spare board to try? Or if you think differently point me in the right direction?
- Thread starter judderman
- Start date
mike 109444
Member
- Messages
- 4,795
Welcome Judderman. It could be you may have a stuck "on" trigger? or there maybe a relay or transistor stuck "on" on the pcb. Do you have a circuit diagram or pics of pcb?
Shedendman
Member
- Messages
- 5,470
Have a look here,you need to contact a Les Ford
http://technicalarc.co.uk/contacts
They refurbed my PCB for £45
What Oxford mig do you have?
Another guy who's very well in the know and a rather nice chap is,
http://www.youngswelding.co.uk/contact.html
http://technicalarc.co.uk/contacts
They refurbed my PCB for £45
What Oxford mig do you have?
Another guy who's very well in the know and a rather nice chap is,
http://www.youngswelding.co.uk/contact.html
Shedendman
Member
- Messages
- 5,470
Go here http://technicalarc.co.uk/download-the-all-new-20122013-catalogue
and download the cataologue you'll see your PCB on page 67
and download the cataologue you'll see your PCB on page 67
