I need some threaded bushes making up similar to these but in mild steel http://www.kayautomatics.com/threaded-bush-298539.html they need to be 70mm long, 45mm diametre for the first 40mm of their length then turned down to 34.5mm diametre for the remainder and drilled and threaded internally, i still need to check what the thread needs to be but it would be something like m27, is anyone here able to help me?
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Need some bits machining
- Thread starter 1.8T
- Start date
I am also going to need two stainless steel rings making up, with a 145mm external diametre and a 128mm internal diametre and approx 6mm thick if anyone can help me with either of these jobs or know of somewhere that can help as most places dont like taking on small jobs, thanks
The thread is actually m30, dont have details on the pitch yet, as a result of the thread being larger than i first thought i have had to redesign the bushes, the threaded bushes are to drop into off the shelf car axle stands to accept the threaded rubber pads you find on two post garage lifts giving me thread adjust soft top axle stands, bit like this but with thread adjust http://www.northerntool.com/images/product/images/146640_lg.jpg
