Narrow exterior door suppliers

[HughF]

Can anyone recommend an online supplier of a narrow exterior grade door? I need something to go in a opening that is 810x1970.

I found one supplier who will supply in this size, but they want a survey and want to install it to. I don't need this 'service', just take my money and give me a door.

Happy to have a hardwood exterior door or even a upvc door, it is to go in a concrete sectional garage that I'm converting into a small work area. I just need something to fit the gap that is an inward opener, in anthracite grey.

I have found a good price for a tricoya exterior door, but I suspect there's not enough spare in the top/bottom to cut it down to height, it is too tall at present.

 

[MattH]

Give Homeworks Solutions LTD a shout, they are over your way and are very helpful.
They installed our bifold doors but we also had some window units off they for the unit which they just supplied.

 

[8ob]

Thats a standard 32" door with a bit shaved off https://www.leaderdoors.co.uk/doors...wood-external-doors-c106/813mm-32-inch-t20087

 

[HughF]

Thats a standard 32" door with a bit shaved off https://www.leaderdoors.co.uk/doors...wood-external-doors-c106/813mm-32-inch-t20087

I can only accommodate 810 including frame. the opening is 2x concrete panels wide.

Most frames seem to be of the following dimensions:
2067x854mm To Suit a Door 762mm Wide

 

[8ob]

I can only accommodate 810 including frame. the opening is 2x concrete panels wide.

Thats going to be a standard door 2`6" then Hugh with a hand made frame, I would imagine a decent chippy would make up a frame a lot cheaper than you could buy a special door.

Bob

 

[HughF]

Right, I'll speak to my joiner mate...

 

[Agroshield]

That's going to be a standard door 2`6" then Hugh with a hand made frame

If his opening is 810 and the door is 762, that only gives 24mm each side for the frame, which is a bit skinny.

Maybe buy a nice hardwood door with solid stiles as well as your chosen hardware and then send to your chippie. He can trim the stiles to allow a better frame thickness. Hinge side can be trimmed more than lock side if necessary.

I do not know how the garage panels are but maybe an L- or U-shaped frame that overlaps the panels might be an option. Even mounting the frame totally inboard of the concrete sections might work.

 

[bigegg]

I'm building a little porch on the side door of the garage so i can use a standard exterior door: opening outwards, though in my case, as i only removed one panel (2ft) for the doorway.

 

[mike os]

Get a upvc door made to size

 

[HughF]

Get a upvc door made to size

Can't find anyone making them small enough or short enough.

 

[rtcosic]

Get a standard sized frame and door and mount ON the wall rather than IN the hole?

<Goes and hides in the corner>

 

[mike os]

https://www.modernupvcwindows.co.uk...-0-0&w=900&h=2100&h0=900&v0=2100&pr=1&p0=00T4

These do ... so they are available

Local firm is often the best bet

 

[Brad93]

Company I went to interview at a few weeks ago.

may be a bit pricy but useful company to bookmark.

https://www.premier-ssl.com/

 

[Gareth J]

"Slide and fold" go down to 825mm in pvc and 700mm in aluminium

 

[Shedendman]

Why not buy a solid door blank cut and lip it?

 

[HughF]

https://www.modernupvcwindows.co.uk...-0-0&w=900&h=2100&h0=900&v0=2100&pr=1&p0=00T4

These do ... so they are available

Local firm is often the best bet

Ordered from these people, fair price. Thanks for the help everyone.