poor farmer
Member
- Messages
- 31
If its the one I think it is, you have a VERY good piece of kit. They were made in Hungary many years ago, Eland also imported a similar range. The Murex version had a Multi diode plate rectifier and a different control card, for cheapness. There's nothing on the card that isn't cheaply repairable, the only other area to check is the main contactor, not underpowered but on the limit. If your confident enough, strip it down and give it a good clean, lightly use wet & dry (not with water) to clean the contacts, emory is too abrasive - rubs the coating off.