MG Midget panels - 1500cc Rubber Bumper Gan 6.

[Nicolasticity]

Does anyone know if a rear lower repair panel is available. BL Heritage and steelcraft only make a full height panel. Need one (or will have to make one) from rubber bumper fixing to boot floor flange

Also cant see anyone making a gearbox tunnel? Is there one of those made?

 

[the snooper]

have a look here

 

[Phil@mpliron]

When i did my 1500 midget i had to buy chrome bumper rear half panels and modify them.
I got them fitted up in place - not welded- scribed a line where the extra metal is under the rear light for the chrome bumper, cut this extra metal off leaving an extra 1/2" of steel on, cut a hard wood dolly to the shape of the panel under the light, held this in place on the rear panel to the scribed line then hammered the extra metal round (had to cut a couple of darts out to get them round), when i was happy with the fit i welded up the darts and dressed in, when i finally fitted the panels i plug welded this area along with the B post.
Hope i haven't waffled too much

Phil