Looking to buy a special bearing

[amron]

Hello
I'm looking to buy a special ball bearing. it's called KD065AR0
it's i.d is 6.5", o.d. is 7.5" and 1/2" high. if you know a bearing supplier that
might stock it - please let me know.
Thanx.

 

[ford34/2]

Bearing

Hope your feeling rich, they can be remanufactured with a two Yr G/tee


Product Specifications

Part Number
KD065AR0
UPC
637400027285
Material Type
Alloy Steel 52102
System of Measurement
Inch
Bearing Number
KD065AR0*RBC
Bore Diameter 6.5 inches
Bore Diameter Tolerance
+0.0000 / -0.0010 inches
Outside Diameter
7.5 inches Outside Diameter Tolerance
+0.0000 / -0.0010 inches
Width
0.50 inches
Max Rotational Speed
2860 RPM
Static Load Capacity
5530 pounds
Dynamic Load Capacity
2346 pounds
EAN
0637400027285
Number of Items
1


Factory Number
SCHATZ STD065X
KAYDON KD65XP
SKF FPXD608
MPB 3TA104-120
FAG L15TA608YP
MPB 3TXR104-120
ADR WA16104N
SKF FPAD608
ADR WA16104H

 

[starlet kp]

http://webshop.abfbearings.com/Bearing/FPXD608-SKF/328242

Although not in the uk it seems they would deliver.

 

[julianthegypsy]

Long shot, but try taking it in to your massey ferguson dealer. If it's ever been used on anything massey ever made or sold, the chances are they can get one, and at a reasonable price.

 

[RonA]

Good luck

Hello
I'm looking to buy a special ball bearing. it's called KD065AR0
it's i.d is 6.5", o.d. is 7.5" and 1/2" high. if you know a bearing supplier that
might stock it - please let me know.
Thanx.

I had a very similar problem with a bearing on my 1934 Wolseley steering box, the bearing although much smaller was a Ransom, Hoffman & pollard special only ever made for Wolseley. I discovered the bearing could be remade ny the firm who took RHP over but lead time was 9months & at a cost of £900. Eventually found a firm down near Leeds who remade the races for me for £50 but had to find replacement balls & remake the ball keep myself.
RonA

 

[MCKDAVID]

depending on what it's for, if it's not "critical" and you have the space, it might be an option to look for a bearing of the same type, but of a standard size that's close and then make up adapter sleeves, inner / outer to suit the shaft / casing dimensions..

Don't know what it's for, so as I said, there could be a lot of variations on a theme, but might be a last ditch option, if one offs aren't feasible (technically / financially)

 

[julianthegypsy]

If both skf and fag list numbers for it, it shouldn't be too hard to find.

 

[ronan]

http://www.vintagebearings.co.uk/

Odd bearings can get expensive really quickly it seems.

 

[Tengtooltom]

Try Paddy Denby Engineering in Ferns, Co Wexford, Ireland.
Phone 00353 9366393 or 00353 9366453. I cannot find a website or email for him.
He bought up a lot of old stock at auctions over here over several years.
Maybe worth a phone call.

 

[Davie]

BRT bearings?

 

[tomsutton529]

Abex Bearings in Wigan have always done good for me.

 

[amron]

could you please tell me their phone no? no results googleing their name.
so far - no results from the others.
Thanx.

 

[brewdexta]

Abex Power Ltd.
Smethurst Lane
Pemberton
Wigan
Lancashire
WN5 8BL

http://www.abexpower.co.uk/

Tel: +44 (0) 19 4222 2928
Fax: +44 (0) 19 4222 1200