- Thread starter oqdos
- Start date
cumbriasteve
Moderator
- Messages
- 9,643
- Location
- Cumbria UK
Welcome to the forum.
Ebay usually has a couple listed and sometimes they are advertised as refurbished but worth checking that does not just mean a coat of shiny paint, an oil change can cost a few quid to do.
Great machines though, always regret selling mine years ago.
Ebay usually has a couple listed and sometimes they are advertised as refurbished but worth checking that does not just mean a coat of shiny paint, an oil change can cost a few quid to do.
Great machines though, always regret selling mine years ago.
Engineer1964
Member
- Messages
- 1,055
Most are dual voltage so no worries there you'd be pushing the boat out to try and find a 225amp - 300amp single phase though, you might find a 180amp one prices vary alot dependant on the leads and if they come with the welder. Without you be looking at buying an 180amp one for about £75-£100, although some do sell for silly money on ebay, there was one last week for £450 
you can get them but you need to keep looking, this one went for £59 and complete with leads
http://www.ebay.co.uk/itm/170594692...DmI=&rt=nc&_trksid=p4340.l2557&orig_cvip=true
if you get a long set of leads say 25 to 30ft then look at paying around another £100, you can buy 35mm welding cable on ebay from £4.99 upwards per metre
http://www.cheffins.co.uk/lot/-579053-vintage-0
you can get them but you need to keep looking, this one went for £59 and complete with leads
http://www.ebay.co.uk/itm/170594692...DmI=&rt=nc&_trksid=p4340.l2557&orig_cvip=true
if you get a long set of leads say 25 to 30ft then look at paying around another £100, you can buy 35mm welding cable on ebay from £4.99 upwards per metre
http://www.cheffins.co.uk/lot/-579053-vintage-0
