- Thread starter reb78
- Start date
zzr1200
Working at 650 ft on open steel work.
- Messages
- 6,357
- Location
- Glapwell, Chesterfield, Derbyshire, UK
Agricultural manufacturers just dont let workshop manuals out, about 15 years ago. The Access company I worked purchased 25 JCB Telehandlers, JCB still wanted £700.00 for one workshop manual...
frank horton
V twins are great but 4"s rule.........
- Messages
- 4,436
- Location
- Crete, Greece
look in Poland, Lithuania or Russia....for free downloads.....
I just thought something would be out there. Its 35 years old so not reslly current tech! They dont even give you a fuse card so you k ow what each fuse does - there are only 12!
Fraserb
Member
- Messages
- 1,562
- Location
- Scottish Borders
If I've not got back to you by midweek remind me, I'll have a look at what we've got tomorrow.
Wonderful. Thanks!
@Fraserb just a reminder as requested.
If no joy with any freebies. Wheres the best (and cheapest) place to get the manuals? Is this a complete set? https://www.ebay.co.uk/itm/234924195706
If no joy with any freebies. Wheres the best (and cheapest) place to get the manuals? Is this a complete set? https://www.ebay.co.uk/itm/234924195706
Fraserb
Member
- Messages
- 1,562
- Location
- Scottish Borders
Yeah I'd completely forgot about this, will get onto it tomorrow.
No worries. Have discovered that some of the loom that runs to the alternator and rpm sensor has been hacked at (explains why no rpm on the needle!). Something to do with the front worklights has also been hacked there too (wiring colours are consistent but some wires have been chopped and dont know why!). So am really curious to get a wiring diagram and other bits now.
