Okay gents, I'm in the US and was given a CEM MIG I which I understand has now been identified as a Cemont machine (but I'd like your help verifying). I'm having a VERY difficult time in locating anyone who can repair or get parts for this machine. I've called and emailed Cemont, AirLiquide, Davian (I can't find a valid contact there) and Telford (no one has returned my contact).
I'm brand new to MIG and was hoping to use this one to practice before dropping any money I don't have on a newer one.
The machine's not feeding wire correctly. I've checked the rollers for appropriate tension, and replaced the tip and was able to get a feed of wire for about 30 seconds then it stopped again. I'm thinking there's an issue with the liner and would like to figure out if there's a way to clean it out or get another one. That's where the need for parts locations comes in.
Here's a couple of pictures that might help.
I'm brand new to MIG and was hoping to use this one to practice before dropping any money I don't have on a newer one.
The machine's not feeding wire correctly. I've checked the rollers for appropriate tension, and replaced the tip and was able to get a feed of wire for about 30 seconds then it stopped again. I'm thinking there's an issue with the liner and would like to figure out if there's a way to clean it out or get another one. That's where the need for parts locations comes in.
Here's a couple of pictures that might help.
