Imperial Sized Bush and Clevis

[rtcosic]

My Google skills are lacking.
I am seeking a 'Metalastic' bush and a clevis pin in Imperial dimensions. The marque specialist doesn't stock them.

Bush: 7/8" OD, 1" long, 5/16" ID

The clevis is one of those with the screw on one end. I could also do with those anti-rattle springs that no-one every re-installs.

Suggestions for a source would be appreciated.

It's for an engine steady bar, although the clevis arrangement is used extensively on the clutch and brake linkages.

 

[OJCar]

For the metalastic bush try Robush https://www.robush.com/

Pin looks very similar to Land Rover part number 216421 https://www.paddockspares.com/216421-clevis-pin.html

Clevis Land Rover part number 275199 https://www.paddockspares.com/275199-clevis-for-handbrake.html

or both together https://www.johnrichardssurplus.co.uk/land-rover-handbrake-clevis-pin-and-fork-275199.html

 

[Agroshield]

I do not know if this is relevant or not:

For similar bushes used in suspension, the in thing these days seems to be polyurethane replacements with a loose sleeve. Do similar exist in that size?

Random example with 7/8" written on the page: https://frontlinedevelopments.com/part/polyurethane-anti-roll-bar-mount-bush-car-set-34-78/

The pin would not be so hard to make from a bolt if necessary but for the price, the Landrover one is good if the size is correct.

 

[rtcosic]

Pin looks very similar to Land Rover part number 216421 https://www.paddockspares.com/216421-clevis-pin.html

That looks exactly right. I knew it was a standard 1950's/60's part, but just couldn't find it.

Robush site wasn't helpful. I'll try polybush sites. I'm not a fan of polyurethane bushes for suspension - other than antiroll bars. This application doesn't involve any rotational movement, so it would be acceptable.

 

[OJCar]

Robush site wasn't helpfu.

From page 12 of the Robush catalogue pdf on their site...

RB3732 and a wee bit of trimming

RB3732

ID 7.94mm (5/16")

OD 22.23mm (7/8")

Inner Length 31.75mm (1 1/4")

Outer Length 28.58mm ( 1 1/8")

You could try contacting them see if they have something that is even closer ...

 

[rtcosic]

From page 12 of the Robush catalogue pdf on their site...
View attachment 464632
RB3732 and a wee bit of trimming

RB3732

ID 7.94mm (5/16")

OD 22.23mm (7/8")

Inner Length 31.75mm (1 1/4")

Outer Length 28.58mm ( 1 1/8")

You could try contacting them see if they have something that is even closer ...

Told you my Google or any search skills were lacking! Thanks