I'm looking for chisels for a Demolition Hammer Drill

[Mark 5]

To be more specific, 400mm long made from 40Cr Steel to fit a SDS Plus chuck, ( not SDS Max ).

I can find them 250mm long but looking for the longer ones.

I don't want Dropped Forge or Carbon type chisels.

Pointed and flat ones are the ones I'm after.

 

[MetalMonkey]

Couldn't tell you what they are made of, but the Makita SDS chisels are decent, they do 400mm for SDS plus.

 

[Agroshield]

...Makita SDS chisels are decent, they do 400mm for SDS plus.

Part numbers D-19021 and D19015

Points and Chisels for SDS-PLUS machines

Products

www.makitauk.com

Makita D-19021 20mm X 400mm Flat Sds+ Chisel from Romford Tools

Makita D-19021 20mm X 400mm Flat Sds+ Chisel from Romford Tools

www.romfordtools.com

Makita D-19015 Bull Point Sds+ 400mm from Romford Tools

Makita D-19015 Bull Point Sds+ 400mm from Romford Tools

www.romfordtools.com

Hilti would also be of known good quality, but you would need to look if the lenght is available.

 

[Mark 5]

Couldn't tell you what they are made of, but the Makita SDS chisels are decent, they do 400mm for SDS plus.

Thanks.

 

[Mark 5]

Part numbers D-19021 and D19015

Points and Chisels for SDS-PLUS machines

Products

www.makitauk.com

Makita D-19021 20mm X 400mm Flat Sds+ Chisel from Romford Tools

Makita D-19021 20mm X 400mm Flat Sds+ Chisel from Romford Tools

www.romfordtools.com

Makita D-19015 Bull Point Sds+ 400mm from Romford Tools

Makita D-19015 Bull Point Sds+ 400mm from Romford Tools

www.romfordtools.com

Hilti would also be of known good quality, but you would need to look if the lenght is available.

Thanks, just ordered a couple of them, see if they last.

 

[brightspark]

Thanks, just ordered a couple of them, see if they last.

i have a few makita chisels good quality and decent steel