IBC

[nickk]

NEEd a new tap for this Ibc,thread o/d is 60 mm,are they all standard ?

 

[julianf]

No, not all standard. About 3 types.

The thread on the exit side of the valve is fairly standard though, and you can get adapters to 1" BSP and just fit a standard ball valve.

 

[julianf]

Ps the thread on the exit is the same as 25 ltr carboy style containers use, so those caps fit if you just want to block the exit.

 

[gaz1]

https://www.ebay.co.uk/itm/IBC-Wate...=3629480991179c6955d9eb3e4a30a5ba10670167f432

 

[Fraserb]

No, not all standard. About 3 types.

The thread on the exit side of the valve is fairly standard though, and you can get adapters to 1" BSP and just fit a standard ball valve.

There's 2 different styles of outlet as well, the one above is by far the most common but occasionally we get a different one.

As you say there's a few different inlet threads as well, the one above is probably the most common as well though.

If the op was closer we've probably 30 or so kicking about.

 

[Mr Roo]

Didn’t @Brad93 have a similar question not long ago? He might have found an answer if so..

 

[nickk]

There's 2 different styles of outlet as well, the one above is by far the most common but occasionally we get a different one.

As you say there's a few different inlet threads as well, the one above is probably the most common as well though.

If the op was closer we've probably 30 or so kicking about.

I’m willing to pay for your effort if you’d send one.

 

[Fraserb]

I’m willing to pay for your effort if you’d send one.

I'll head out in a minute and get one and check it's what your after

 

[Fraserb]

I’m willing to pay for your effort if you’d send one.

I'm 99% sure I've some the same, don't have big pliers with me to screw one off, I'll get that done tomorrow

 

[nickk]

Btw,it’s the left side that screws onto the tank,so I better measure the male diameter of the ibc.

 

[nickk]

@Fraserb ,confirm,male on tank is 60 o/d. Thanks.

 

[Fraserb]

@Fraserb ,confirm,male on tank is 60 o/d. Thanks.

7

 

[nickk]

Looks like the one,do you mind helping with this? I can pm you details.

 

[Fraserb]

Looks like the one,do you mind helping with this? I can pm you details.

Yeah no problem, might be a day or 2 before I can get it send off