help with migmate turbo 105

[gnasher]

hi all....well bought my first welder today...only cost me £20 unfortunatly its not complete hence the price...bit of a gamble really..im hoping i can get spares for it...the spring and nut are missing where the wirereel sits and i cant work out if its gas or gasless because i cant seem to find the where the airline or regulater are??puzzling can anyone help

 

[Masked Marauder]

The welder will be described on the front if it is gasless or dual purpose. As you don't know then it probably is not.

The gas pipe is a 6mm OD pipe that runs all the way from the head of the torch, down the sleeve, through the
welder and out the back with enough to connect to a small disposable gas bottle regulator.

105 turbo:

Dual Purpose:

It should not be hard to put together a replacement spring, bolt and washer affair.

 

[gnasher]

had the case off today there is a pipe coming out of the handle,its broken off inside the case,so i guess its pretty straight forward to replace...my mig doesnt say dual purpose on the front although it does have the gas pipe?...ive sourced a new spring and nut too,and a regulater so hopefully ill be using it this week....thanks for your help

 

[Masked Marauder]

http://www.robotstoreuk.com/ACTUATORS/AIR_SYS_COMPONENTS/AIR-Fittings-1.htm

You need some pipe then and a straight connector.