Help identifying some roofing sheet profiles

[jimbo84]

Picked up a couple of roofing sheets and trying to identify the profile to get some foam fillers is coming up with nothing.

They're bankrupt stock so no chance of finding out from the guy I got them off.

Measurements below.

There's a big list of 15-20 different profiles I've found on a website but it doesn't match any on that site.

 

[gaz1]

all you can do is look and find the profiles that you have there

 

[morph]

Is it not standard 32/1000? Looks a lot like it....

 

[eddie49]

Found it for you:

 

[gaz1]

you are better off using the proper foam gun than that thing due to its more controlable

https://www.screwfix.com/p/no-nonsense-foam-applicator-gun/28483

those are controlable and if youve used one before you can squirt enough into it knowing it wont go all over the place and expand way too much

that foam gun above really belongs in the bin even if you are doing large holes that some people use it for

 

[Agroshield]

You may already know this, but 'profiled foam filler' in Google gives lots of results.

You could also maybe send a sketch to these people:

https://www.brettmartin.com/en-gb/d...rketing-Documents/Foam-Fillers-Price-List.pdf

 

[jimbo84]

Is it not standard 32/1000? Looks a lot like it....

Unfortunately not, it's all pretty standard apart from that bottom measurement of 85mm that is the strange bit, been out and measured it about 4 times thinking it was me getting it wrong but it's definitely 85. I was thinking they'd just be a standard size too but it appears like everything there are a million variations.

Found it for you:
View attachment 234794

I did consider it and it may well end up being that, I usually end up making a right mess with that stuff, and always feel it looks cowboy, it will be behind a gutter though but there is a bit under a flashing that I need to fill too.

You may already know this, but 'profiled foam filler' in Google gives lots of results.

You could also maybe send a sketch to these people:

https://www.brettmartin.com/en-gb/daylight systems/news events/~/media/Files/Daylight-Systems-Document-Library/Marketing-Documents/Foam-Fillers-Price-List.pdf

Thanks for the link I'll give them a try, they have tons of them, if mine aren't in that lot then there's no hope.

 

[spartan]

Could you buy 2 that are close fit, adjust/glue together, make your own? Presumably depends on suitability, cost and how much you need. Don`t know if they could be glued, consult any forum oracles.

 

[jimbo84]

There are only 2 sheets and need fillers for the bottom to go under the sheet and the top to go under the flashing. I've just ordered some foam blocks from a foam supplier and will cut my own