Harvey frost toolbox tray

[excossack]

Over the last weekend and today I have been making a tray to take two toolboxes or ex-mortar cases.
Some pics.
Test fit of the boxes on the frame


Frame welded up


50x50mm 3mm angle and some 3mm flat bar. Mounted to the HF by u-bolts.
Welded with a Cebora 130 with Co2

 

[Robotstar5]

Neat idea I've only seen them with one box mounted transverse in front of the axle.

As an aside, do you need any slings, chains, shackles etc.?, found a load today in the garage while looking for something else.

 

[excossack]

It took a little bit of pondering after I purchased the cases.
I can get a 2t trolley jack, sledgehammer etc in the cases
Chains etc are always welcome addition as spares.. If you want to pm me with some details if you don't mind?

 

[Robotstar5]

Chains etc are always welcome addition as spares.. If you want to pm me with some details if you don't mind?

I'll sort them out and send you a PM in the next few days, I packed them all back when I couldn't find what I was looking for.

 

[excossack]

Ok cheers

 

[excossack]

No real update on this other than, the frame is painted silver and attached to the crane.

 

[excossack]

Here is the picture of the frame painted

 

[excossack]

Finished. Paint and boxes bolted down.