EN24T hex billet

[snowcat]

looking for a firm that can supply just under 1' billet of 80mm EN24T hex, usual suspects have been less than helpful, and only seem to stock free machining hex up to 70mm..... IL use some round off the shelf and flash some flats through if this draws a blank...

 

[scott0031]

Hi Snowcat,

I will pm you some details of someone that might be able to help but they are in Kent. May find you have similar trouble on the size front the other option is get a round blank big enough and machine it to a hex.

The only other place that springs to mind is macreadys who specialise more in the higher tensile steels. Of course it will be a premium from them.


Kind regards

Scott